ZSA Voyager Butterfly Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A low filament, low profile ravel case for your ZSA Voyager keyboard.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 657
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I printed this compact and filament-efficient case using PETG, ensuring durability while keeping material usage to a minimum. The design is small, lightweight, and optimized for easy printing without sacrificing strength.
The hinge is designed to use a piece of filament as the axle.
Recommended Print Settings:
- Walls: 3 perimeters
- Top & Bottom Layers: 3 layers
- Brim: Not required
- Supports: Not needed
I've uploaded two 3MF files: one optimized for multi-material printing and another for manual color changes using a 0.4mm nozzle.
For manual color changes, you’ll need to print the parts one at a time while ensuring that your printer does not perform bed leveling between prints. For example, first, uncheck the left case and print the logo. The manual version has a 0.3mm first layer for the logos and main parts to ensure better visibility. Then, switch filaments, uncheck the logo, and print the main case in a different color. Repeat the same process for the lid.
Important: Double-check that your printer does not probe the bed over already printed parts to avoid collisions!