1 / 1
ZSA Voyager - Replacement Key Cap 2u + Homing Bump Variant — zdjęcie 1

ZSA Voyager - Replacement Key Cap 2u + Homing Bump Variant

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement key cap for the 2u key (thumb cluster long key) on ZSA Voyager.

Ocena
5 / 5
Polubienia
3
Pobrania
30
Wydruki
1
Wyświetlenia
235
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

NEW: Homing bump variant is now available!

This model is made to fit into the standard key switches that come with the Voyager. It is definitely not as high quality as the ZSA caps. This will not allow light through it unless you print it with translucent filament/resin.

Print Setting Recommendations

  • Supports - ON
    • Organic
  • Skirt & Brim - ON
    • 3-5mm skirt/brim to help with adhesion to the plate
  • Layer size
    • 0.15mm is usable
    • Go smaller (0.1mm) for a finer, cleaner, smoother key

Special thanks to @PeterSteele_2836495 for noting that I hadn't modeled this key.

Tagi