1 / 1
ZSA Voyager Keyboard 15 Degree Tenting Stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a solid model with a place for 2 10x2mm cylindrical magnets to secure the stand.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 285
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a stand for the ZSA Voyager keyboard to tent it 15 degrees out. There is also an additional model you can use as a direct print of a TPU foot or as a stencil to cut a foot out of foam to glue to the bottom.
