ZSA Navigator holder with Tenting Bar (7º only for now)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A ZSA Navigator holder with Tenting Bar, can be used with/without the original magnets. Right now 7º with more to come.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 97
- Wydruki
- 1
- Wyświetlenia
- 918
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
What is this
This is a ZSA Navigator holder with tenting bar, for the voyager keyboard, it allows you to switch your trackball between left and right side.
Included is a second tenting bar without a holder, you should mirror whichever model you need to be on the other side.
You can reuse the magnets from the original tenting feet, it has holes for heat insert to screw the magnet it (3.5mm DIA)
How to use
- Make sure you have the right mirror orientation for your Tenting Bars/Holder
- Print!
- Press fit your navigator core inside the holder and use as specified by ZSA.
Optional
- Insert 3.5mm DIA heat insert into the lower holes.
- Unscrew the magnets from the original tenting feet, keep all parts.
- Screw the magnet in the heat insert.
Important to note
The tolerances are pretty tight and is a press to fit
Saturday 6th September 2025 - ~18h00:
Both holder and tenting bar were tested in PLA without issue, however the tenting bar with holder has not been tested yet, will update as soon as printing has completed.
Saturday 6th September 2025 - ~20h00:
Tested the ”integrated” version, and all is well (see picture), ~one thing is the Trackball position on this model is lower than the stock position~, it’s actually the same, I just like it further from the thumb cluster, I will upload more trackball position version.