Hex profile Schneider Maxx 270 Marker holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hex profile Schneider Maxx 270 Marker holder
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
I just got myself some paint markers and was looking for a simple holder that can be extended.
The hexagon minimum width is a little over 17mm, which is perfect for my paint markers with 15mm diameter.
The overall height of the holder is 60mm.
How I Designed This
Used 2 polygons with 6 sides In TinkerCad.
- One larger as a solid
- one smaller as a hole, raised 2mm above the "ground"
NOTE: probably a better approach would have been to increase the height at this step to 60mm. (read on)
Grouped them together and had the hexagon shape for the holder.
Copied the object a few times, "glued" the walls together.
Increased the height (extruded?) to 60mm and printed a sample.
I cancelled the sample I started printing as I realized that my 2mm bottom layer/wall was now 6mm, due to the height increase.
I had to change the height again and remove part of the bottom to have it reduced to ~2mm with an extended box hole.
Thinking in hindsight, TinkerCAD allows me to go back to the basic objects that were grouped, so it could have been simplified. :)