Hex profile Schneider Maxx 270 Marker holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hex profile Schneider Maxx 270 Marker holder
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 57
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
I just got myself some paint markers and was looking for a simple holder that can be extended.
The hexagon minimum width is a little over 17mm, which is perfect for my paint markers with 15mm diameter.
The overall height of the holder is 60mm.
How I Designed This
Used 2 polygons with 6 sides In TinkerCad.
- One larger as a solid
- one smaller as a hole, raised 2mm above the "ground"
NOTE: probably a better approach would have been to increase the height at this step to 60mm. (read on)
Grouped them together and had the hexagon shape for the holder.
Copied the object a few times, "glued" the walls together.
Increased the height (extruded?) to 60mm and printed a sample.
I cancelled the sample I started printing as I realized that my 2mm bottom layer/wall was now 6mm, due to the height increase.
I had to change the height again and remove part of the bottom to have it reduced to ~2mm with an extended box hole.
Thinking in hindsight, TinkerCAD allows me to go back to the basic objects that were grouped, so it could have been simplified. :)