Counting matching models…
This 3D printable model is a reducing adapter designed to seamlessly connect ventilator circuits, such as CPAP hoses, with different diameter requirements. It allows for the adaptation between adult and pediatric hose sizes, featuring a…
I raised the height to allow the filament tube to be outside the chain, this allows the tube to be less crunched.
Lightweight ruler holder that can be screwed into a wall using M3 countersunk screws. Inspired by this Model by HolzerMax and adjusted to my smaller ruler.
To making the handling for our fairy lights a little bit easier, i made this clip. The clip is for perforated plates with 15x15mm holes.
Schablone zum fräsen von Fingerzinken mit 15mm. Für bretter bis zu einer Stärke von 30mm Wer weiß, wofür man dieses Werkzeug braucht, weiß auch wie man es benutzt, desshalb hier keine Erklärung : ).
Aufputz Gehäuse für 2er Steckdose oder Schalter - auf 0,15mm Nozzle bemaßt SLDPRT Datei anbei.
Gridfinity bin for Dremel It has a 1x2 bin footprint. Used for Dremel spanner, chucks and standard 3.15mm (1/8") tools. I really needed a bin with both spanner and tools, and figured I'm not alone. There's no lip on the bin since You…
The factory HDD caddy for the Dell OptiPlex 9020 Micro only fits a 9mm drive. This is a custom version designed to fit a 15mm drive. I’m reuploading this to Printables so more people can find it, as it took me three hours to discover that…
A model of a micro four thirds lens for anyone who wants to see how the lens looks like. You can 3D print it to see the size in real life.
Keep your cables neat and secure with these snap-fit cable organizers designed specifically for 15mm aluminum extrusions . Ideal for 3D printer frames, CNC machines, or DIY rigs using small-format aluminum profiles. These clips help route…
This is a remix of the MacBook vertical stand model. In this version, the gap between the mountains measures 15 mm.
Clip together frame. Two versions, singe glazed and double glazed designs.
For best results, print solid. PLA 0.2mm layer height Disclaimer: I make no promises or claims about the safe weight-carrying capacity of this model. You make use of this at your own risk with no liability or responsibility from me.
I made this for mini dice 15mm. It still uses M3 screws and nuts. It does need an 84mm x 100mm x 2mm plexiglass sheet for the front. I've also removed the dice holder section because I have dice holders and didn't need that part. I made…
Here's a universal lens support bridge for the Arri LWS / Lightweight 15mm standard (60mm spacing on centre). You can use it flipped up or down depending on your needs and your lens diameter. Making this saved me about $400, maybe it'll…
I made this for my Pheidole Bicaranata, Southern Tropical Fire ants, and Black garden ants, they all like it so far! 4 tube inserts that are 15mm, fits with all of my other Ant series. I suggest putting some cotton around the tubes or…
I made this for my Pheidole Bicaranata, Southern Tropical Fire ants, and Black garden ants, they all like it so far! 4 tube inserts that are 15mm, fits with all of my other Ant series. I suggest putting some cotton around the tubes or…
|| Total price of models if purchased separately : 71.5€ >> more than -30% OFF with the pack || Hello, High-detailed models of WW2 German tanks for 3D printing, we recommend to use this models on resin printing. All the models include…
I ran across Down Range while looking for simple wargaming rules and decided to knock out some simple 15mm (RISK-piece size; aka very tiny!) models to work on my FDM machines. This is a Russian BMP-series Infantry Fighting Vehicle - at…
I ran across Down Range while looking for simple wargaming rules and decided to knock out some simple 15mm (RISK-piece size; aka very tiny!) models to work on my FDM machines. This is a Russian BTR-series Infantry Fighting Vehicle - at…
I ran across Down Range while looking for simple wargaming rules and decided to knock out some simple 15mm (RISK-piece size; aka very tiny!) models to work on my FDM machines. This is a Russian TIGR-series Truck. Printed for me without…
I designed my own box because I could not find what I was looking for: There should be 12 columns for E12 series The drawers should be as small as possible, I don't want to take up a lot of space. The resistors should fit in full length,…
Achieve professional-looking joints in your bathroom or kitchen without the mess. These profiling cards are designed to smooth out silicone or acrylic sealant, creating perfect radii every time. The Design: Size: Handy 80 x 80 mm format…
A replacement hook for the helmet nets of Ortovox backpacks. Of course it can also be used for other purposes, the band.
The approximate height is 13.5 mm. Without holes, like I did for the bathroom to glue
This ruler will help you to game in 15mm, especially with rules that are written in 28mm scale. Simply print this out and you won't have to divided all measurements by 2 in your head anymore. The 3mf file is set to use two colors of…
Nikonos 15mm Ultrawide Viewfinder to coldshoe conversion
Halterung für 15mm Vorhangstange (Holz, Kupferrohr o.ä.) mit 10mm Wandabstand zum anschrauben mit 3mm Schraube
https://www.biltema.se/bygg/vvs/sanitet-och-vatten/rorinfastning-vvs/rorklammor-for-kopparror/rorklamma-mini-10-16-mm-2-st-2000032479 Works inside these.
I tried cutting baseboards with a universal saw box, but this was very difficult as the height of the guide was same height as my baseboard, resulting in no guidance in the beginning of the cut.... Not ideal for an amateuar wood worker…
BOM: Printed with ROSA3D High Speed PLA Gray Save yourself a trip to the hardware store! This is a complete set of classic, nail-in cable clips for routing wires along baseboards, walls, or door frames. Key Features: Nail Compatibility:…
XOLcPAP UHF Ducts for direct fitting of the OD 18mm tube.
Replacement buckle (male part only) for chest strap on Patagonia Black Hole 32l backpack The original male part broke, while the female part held on and strap was sawn in. So I decided to exactly replicate the male part instead. In the…
To scratch the back of the covers before placing the cardboard. Guides, rulers. Print Settings Printer: Sethi Rafts: No Supports: No Resolution: 0.3 Infill: 20% Filament: Any PLA Any Notes: 30cm x 30cm table Category: DIY
complete redesign from other model ; https://www.thingiverse.com/thing:3663098 a quick and easy way of mounting blades to any surface. 3 files avalible, Mini 15mm (Model 14mm) Medium 20mm (Model 19mm) Bigg 30mm (Model 29mm). Prints…
Simple clips to help direct a Bowden tube along a cable guide.
SSD Stackers for 15mm U.2 size SSDs are meant to allow you to stack and mount two or more SSDs together You will need 4 per SSD you add to a stack. A stack of 2 needs 4, stack of 3 needs 8, etc. Always start by mounting your top drive…
A basic J shaped hook meant to be placed or slipped over top of a rail, cabinet door, or shelf wall. Great to hang items such as hats, keys, coats, etc. Five different models with gap widths to fit over wall thickness from 12mm to 16mm.…
das sind einfache Deckel für 15mm Aluminium Vierkant. Diese habe ich als Stützstreben bei meinem Artillery Sidewinder X1
I am moving board game miniatures onto shelves and so am consolidating each game and all of its expansions into a single box. To do this, I've created this generic box insert system, BITS, the Box Insert for Tokens and Stuff! This BITS is…
copper pipe mount for shower curtain rail Category: Bathroom
Bases with 40mm frontage for 15mm (1:100) scale Ancients, suitable for De Bellis Antiquitatis (DBA) Bases feature a shallow lip, which may help with minor unevenness in playing surfaces. Optionally there are variants that allow for…
A straightforward solution for organizing your books on standard 15mm shelving units. By sliding the bracket directly onto the edge of the shelf, you get a support that doesn't require screws or permanent adhesives. Because plastics can…
Contains 2 different floor extension: 15mm outside 12mm inside CNC + TPU Rubber gasket 10mm outside 7mm inside CNC + TPU Rubber gasket Features countersunk screws so they wont get destroyed when bottom out.
This is designed for a Medusa with a Z spacing of 115mm. Feel free to chop it up and make it yours however you see fit.
This is an adapter I need to mound a microphone with cold shoe in a 15mm rod holder. The rod is 50mm lenght.
swift rowing hatch cover 115mm, I will add photos later sorry
Custom feets that encase the flimsy tubing of cheap drying racks. Works for racks that have 15mm tubing, and a 50mm bend radius. Each foot needs 2 mirrored shell parts, 2 TPU feets and 7 M3x14 (M3x16mm works as well) screws and M3 nuts.…
My fan came thinner than the original design so I trimmed the drawings to 15mm and now they fit fine. I also filled in the holes of the panel as I went with the speed controls which were in the usb powered speed controls. This is what I…
I made a holder for GreenGo intercom antennas (or beacons) that clips to stands with 15mm diameter. (For example K&M microphone stands)
Compact and secure hook designed to snap tightly onto a 15 mm diameter rod. Ideal for bathroom use, it provides a stable hanging point for towels, sponges, or accessories without slipping or rotating. The clip-on design ensures a firm…
1x1 Gridfinity holder with 15mm Round Holes, two models with a slot. Some have equal holes, some are dual height.
needed some stands for frames that have been on a wall with cable hanging out on the bottom hole - so i added 10/15mm on bottom. sry for the clunky approach - i just started with 3D. “it kind of works” but is far from perfect
Jest to mój pierwszy model, mam nadzieje ze się przyda, miłego pobierania.
Very simple and easy to print small mitre box to cut D-type (in my case) 30x15mm trunking. Printed in Prusament PETG Urban Grey. Easy to screw down on a board for cutting.
This remixed part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting 15x15 mm HGLRC M100-MINI GPS module on a SpeedyBee Mario 5 frame.
This backplate was created to keep items from coming in contact with the exposed electronics while having a 15mm u.2 drive installed in the vertical orientation. If you use m3 standoffs you can keep the horizontal orientation as long as…
A drum stick holder that can be put into a ring binder (ISO 838, 2 hole). The diameter of the stick should be 15mm (actually I measured 14.5mm, but I guess it should be 15mm).
FYI: The collet spacing on the MMU3 is 14mm I hope you like ❤ this remix! Post you makes!! Happy Printing!!!
This 3D printable model is a reducing adapter designed to seamlessly connect ventilator circuits, such as CPAP hoses, with different diameter requirements. It allows for the adaptation between adult and pediatric hose sizes, featuring a…
I printed using 0.2mm, stringing can occur between the millimetre gaps change setting towards your liking. no extra things you need to do. My printer Neptune 4 pro 0.4mm nozzle PRINT WELL WITH DEFAULT SETTINGS CAN BE PRINTED IN HIGH SPEED
Standoffs for OBO Quick M16. The standoff is 15mm in height and snap fits into OBO Quick M16.
na stavbu treba klece pro 3D tiskarnu Hliníkový L profil 15x15x2 z ehlinik.cz Ve spodnim dilu je pripravena dira pro zapustny sroub 4 mm Na 1. obrazku je klec vzhuru nohama, at je videt dira pro sroub
This is a M12 pegboard tool holder for a pegboard with 15mm grid (center to center) and 5mm holes. It has 2 5mm-ish pins that keep it in the grid and 2 6.5mm holes to use either tapping screws to screw it to the board or I used 6mm metric…
Milwaukee M12 Battery Holder Pegboard 15mm grid (center to center).
Milwaukee M12 Charger Pegboard Mount for a 15mm grid
Milwaukee M28 / Würth 28V Charger Pegboard Mount for a 15mm Grid (5mm holes)
Combo Wrench Holder Pegboard 15mm grid (screw version) (e.g. Proxxon Set) I adapted it to a 15mm Pegboard grid with 6.5mm holes for 6mm screws. I cut 6mm threads into the 5mm holes to use 6mm metric screws.
Power Outlet Strip Holder for Pegboard with 15mm Grid for a Brennenstuhl Eco-Line power strip
[EN] You can find the description in English below [ES] Escuadras de Ensamble en X y T para Melamina de 15mm Estas escuadras de ensamble en X y T son la solución perfecta para quienes trabajan con melamina de 15mm, proporcionando una…
This model is designed for printing on printer with 0.2 mm nozzle. Walls will not be printed properly, if printed with normal 0.4 mm nozzle. Thanks for downloading my small work :)…
Cable passthrough specifically designed for MK4 xLCD connector dimensions. Inner dimensions (window) are 35x15mm, outer dimensions (for cutout) 37x17mm . xLCD screen cable fits with diagonal movement, for straight passage upscale model a…
A hook to hang stuff from that slides on to the edge of a 1/2" thick shelf
Small turning knob for M5 hex head screws or M5 nut. Insert the hex head or the nut and secure it with the small counterpart, so it wont fall out of the knob. The turning knob allows you to easily screw everything tight without using any…
A lot of dashcams have 15mm ball for mounting in the socket. This socket allows you to mount the camera to flat surfaces. Like a Music Studio Roof, yummers. Category: Camera
This is a 3D printable Mini DIN rail. Print it upside down without supports. You can use M4 socket head bolts or use VHB tape. Whichever you prefer.
Fan shroud for 15mm CPAP hose. You need to cut the rubber end off the CPAP hose and connect the raw hose directly to the inlet. Added custom beam and clamp to help secure the CPAP hose. Use 2x 6mm M3 screw to secure the clamp to the beam.…
This is a simple cap covering the nut holding the windshield wiper arm in my Volvo. It may fit as well for other brands, where the nut/wrench size is 15mm. I designed it based on the remains of the original Volvo cap, with slight…
I raised the height to allow the filament tube to be outside the chain, this allows the tube to be less crunched.
Angle grinder 115mm holder/mount. Printed in abs Infill 20% Print with supports 1h30 print Print the spacers only if you need more depth.
To avoid transitions/turns/steps, which are often complicated and end up looking ugly. I offer a very simple and nice (will never be visible ;) ) spacer for installing Tesla Wall Connector Gen 3 using a cable channel measuring 30x15…
Made for Kitchenaid refrigerator KRFC704FPS05 but may work for other models these spacers were made to achieve spacing to fit two pyrex dishes without interference to an upper shelf. Print one spacer for each of the four corner supports.
From @Frederik THX https://www.printables.com/model/269408-filament-swatches-that-fit-in-a-slide-tray-or-caro/files only version with 1 notch : ad a hole for attachment at filament box.
15mm Rod mount for the DJI Focus Pro Lidar Mount. Uses 2 M5 Nuts, 2 M5 Screws, and the screws needed to mount the Lidar Sensor. Once you've printed the 2 parts, insert the M5 nuts in the recess, then slide the top of the bracket over (you…
50mm inner diameter, fitting european power plugs. If you need other sizes, please tell me in the comments. It's a bit tight at first but gets softer when screwed in and out a few times.
I wanted the lidar unit of a DJI focus pro set underneed just in front of the matte box of my video rig. For a 15mm rod rig. With 60mm spacing between rods. (Smallrig shoulder rig for example) Uses m3 hardware: 2x bolt, nut and washer.…
I made a clip for my rope light but also used it to organize other tools around the house. This is another version of the clip accommodating a different size part. This version can take up to 15mm. PETG is recommended if the clip is used…
This is a simple hook that can be used with any 15mm thick shelf. Originally designed for IKEA BURHULT shelves.
Don't want to pay $150USD for a 15mm rod mount? This print lets you mount a Bright Tangerine Misfit Atom to a smallrig 15mm rod mount clamp. Designed for a standard 85mm vertical distance between the centre of the 15mm rods and the…
Gedruckt in PETG hält ohne Probleme schon über ein Jahr.
Allows a single 15mm rod for focus motors or other accessories to be mounted to a Bright Tangerine Misfit Atom. Parts needed 4 x m3 threaded inserts 4 x m3 x 8mm screws Installation (1) Install the threaded inserts into the 4mm holes and…
![KP3S — Modular 5015 Fan Shroud — [STOCK] CPAP TUBE 15mm — Kingroon](https://media.printables.com/media/prints/1034260/images/7845825_caaaaf6f-a62d-423b-b46e-665f7307d731_08c93541-e169-4ac8-8f3a-7dffe75be502/unnamed.jpg)
