1 / 4
Large (Two Part) Storage Crates (360mm x 215mm x 50/90mm)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A crate larger than my print bed (250x250) printed in 2 parts and joined with pegs.
- Rating
- 0 / 5
- Likes
- 61
- Downloads
- 303
- Makes
- 0
- Views
- 2,159
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
I needed storage crates for a specific cabinet which were larger than my Bambu build area (250x250mm). This crate prints in 2 large pieces which are joined by 4 pegs. The base has a small interlocking bevel to seal the gap and add minor bit of strength. The crates nest securely when stacked.
Dimensions:
- 360 x 215 x 50
- 360 x 215 x 90
If needed, can remixed to be stronger with thicker base and a more secure interlocking joint between the bases. However for my application these are plenty strong when printed in PLA.