Large (Two Part) Storage Crates (360mm x 215mm x 50/90mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A crate larger than my print bed (250x250) printed in 2 parts and joined with pegs.
- Ocena
- 0 / 5
- Polubienia
- 61
- Pobrania
- 302
- Wydruki
- 0
- Wyświetlenia
- 2150
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed storage crates for a specific cabinet which were larger than my Bambu build area (250x250mm). This crate prints in 2 large pieces which are joined by 4 pegs. The base has a small interlocking bevel to seal the gap and add minor bit of strength. The crates nest securely when stacked.
Dimensions:
- 360 x 215 x 50
- 360 x 215 x 90
If needed, can remixed to be stronger with thicker base and a more secure interlocking joint between the bases. However for my application these are plenty strong when printed in PLA.