DJI Lidar to 15mm rods attachment.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Should be quite simple. For on a 15mm rod rig. With 60mm spacing between rods. includes a cover for front protection.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 147
- Makes
- 0
- Views
- 548
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted the lidar unit of a DJI focus pro set underneed just in front of the matte box of my video rig.
For a 15mm rod rig. With 60mm spacing between rods. (Smallrig shoulder rig for example)
Uses m3 hardware: 2x bolt, nut and washer. Exact length of bolt should be no more (or a little less than) 20mm in order to prevent hitting the expensive lidar module! Prefit before attaching the lidar and file bolts down when bolts are protruding is my advice. I had to do this myself to prevent damage! Use on your own risk!
Small cover is fixed with a little tape… KISS principle. (Or you may call it lazy designing).
Prints without supports. Use something strong like PETG. I use 3 perimeters for parts like this.
I'll add some more pictures soon.