188 models
FIND ALL MY DESIGNS HERE : https://cults3d.com/en/users/Zuff/creations Do you like my work? Can you support me with a ☕ or maybe a 🍺? It all depends on the time 😄 --- Bracket for adding an LED strip to the print head of the Creality K1 or…
This remix was made because every single time I change a nozzle I had to unplug the cable from the LIDAR and put it back in again. That was every single time quite time intensive and the plug was prune to bending the pins. Reforcements…
Haven't tested it with Creality K1 yet.
This is a Remix / Reupload of DzzD's original “Sticker Holder”. I simply created the image of the calibration sticker to print. The .3mf included is otherwise unaltered except for the size. I use a Tronxy glass plate that is 3.6mm thicker…
RPLIDAR A1-M8 case, suitable for all hardware versions. Using the upper or lower top closure depending on the length of the motor axis of your lidar, depends on the hardware version (R1, R2, R3), the difference between the two parts is…
A simple but functional remix of this great Design, intended for those who have the Lidar attached to their K1 Series. Added a left side window for the Lidar cable / connector, keeping the style and functionality of the design. Printed in…
Creality K1 MAX lidar callibration sticker, direct printable pdf (scale 1:1) and customizable dwg
Link to reddit post: https://old.reddit.com/r/3Dprinting/comments/l0nnsa/printed\_a\_7\_mile2\_section\_of\_chicago\_using\_lidar/ These are a few tiles from my Chicago Lidar Data Print. A guide will be posted in the reddit comments.…
The (M)edium format (R)ange(F)inder is a 3D-printable camera that uses relatively easy to source, off-the-shelf components. See the Github repo for the most up to date files, including firmware and KiCAD / Gerber files for the custom PCB.…
Address change ;) https://learn.adafruit.com/adafruit-vl53l1x?view=all # SPDX-FileCopyrightText: 2022 wrdaigle for Adafruit Industries # SPDX-FileCopyrightText: 2022 Kattni Rembor for Adafruit Industries # # SPDX-License-Identifier: MIT…
I printed the original version out but the holes to mount the LIDAR unit didn't line up. So I moved the holes around to fit correctly. I also made the mount 2mm thick to give it a little more stability. Finally in the v2 I also added some…
This is concept of cheap 3D scanner with lidar ( http://www.benewake.com/en/tfmini.html ). I use Arduino Nano with CNC shield + A4988 driver for stepper motor. Scanner write position (x,y,z) to SD card. buttons for home H(orizontal), for…
15mm Rod mount for the DJI Focus Pro Lidar Mount. Uses 2 M5 Nuts, 2 M5 Screws, and the screws needed to mount the Lidar Sensor. Once you've printed the 2 parts, insert the M5 nuts in the recess, then slide the top of the bracket over (you…
This design allows you to hold an A1 Lidar from RPLidar to the Turtlebot3 waffle plate. The waffle plate is a module robot base platform used in the open source Turtlebot3. The attached 3mf file includes my selection of variable layer…
Residents of Hawaii use the Shaka to convey the "Aloha Spirit", a concept of friendship, understanding, compassion, and solidarity among the various ethnic cultures that reside in Hawaii, lacking a direct semantic to literal translation.…
In version V2, the hole sizes have been optimized Simple AF Cartographer - repository thanks to which this model was created In version 1.1, the cartographer model was added(into step file), the edges were rounded. BOM: 2x - Heat Inserts…
This is a scale model of the Eiffel Tower area of Paris, France, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when…
I wanted the lidar unit of a DJI focus pro set underneed just in front of the matte box of my video rig. For a 15mm rod rig. With 60mm spacing between rods. (Smallrig shoulder rig for example) Uses m3 hardware: 2x bolt, nut and washer.…
In FPV (First Person View) drone flying, the application of positioning technology has become increasingly important. Positioning technology not only reduces the likelihood of losing the drone but also provides a stable flying experience…
Model Description/Processing: 20 square miles of downtown Denver/South Denver Data collected from: https://data.drcog.org/dataset/lidar-ql2-index-in-co-sp-central-2020 Collected data was processed using the steps from this reddit post and…
This is a sizing blank
Lidars (LIgh Detection And Ranging) measure distances by illuminating the target with laser light and measuring the reflection with a sensor. When combined with a mechanical way to aim the beam, they can output 2D or 3D point clouds. This…
This is a scale model of Lower Manhattan, New York, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed with…
Support for the Slamtec RPlidar C1 lidar, it is designed to house the connection cable and the USB UART converter inside, in order to reduce the amount of wiring cables, a 12 mm hole must be provided, to pass the USB cable, on the surface…
Since the LiDAR Unit doesnt come with a Cover for protection when mounted on a Rig, i decided to design this one for it. No extra fastening, sits firm Spacing for foam rubber for better protection Fits when mounted on standard LiDAR…
Slightly tweaked mount for the BTT Eddy to use the LIDAR USB header on the tool head of the Creality K1 series
The LIDAR unit salvaged from a Neato XV11 Robotic Vacuum Cleaner is a cheap LIDAR for robotics that reports accurate range information up to 3-5M in a continuous 360 Degree scan. This is a stand to suit the XV11 Lidar and has primarily…
The model is a little cursed so it requires support. I recommend a high support density and 0 interface layers.
This is a scale model of the central third of the Las Vegas Strip, Nevada, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks…
Piece to mount tof400c lidar below VTX in SpeedyBee Mario 5 DC frame. Lidar pointing down through hexagonal cut-out
Hi there! I am currently studying Robotic's Software Engineering at Universidad Rey Juan Carlos in Madrid, Spain. In our studies, we are using the TurtleBot2 as a base for learning ROS 2 . Initially, the TurtleBot2 was equipped with a…
A mount for the commercially available A1 LIDAR. The similar units pulled from Neato robots will have a different footprint. Print instructions Category: Robotics
This is a remixed model! Please, take a look to the OG model for additional information. Cheers!
This is a scale model of downtown Los Angeles, California, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when…
This is a scale model of Edinburgh, Scotland, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed with 0.1 to…
This is a scale model of downtown San Francisco, California, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when…
Einteiliges Bauteil zur Verwendung mit der feingefrästen Aluminium Platte von kis3d ( https://www.kis3d.de/Gussplatte--Bambu--256x256x5--P1P--X1-X1C-P1S.html ) auf dem X1C. Passgenau für das am Druckbett original angebrachte Calibration…
This is a mount for the LIDAR unit found on a Neato XV11 Robotic Vacuum Cleaner. It's a good fit for my unit. It's OpenSCAD so you can modify it if you need to. Category: Robotics
Introduction In the Robotics Software Engineering program at URJC , we've recently welcomed four iRobot® Create® 3 robots —an event that's certainly cause for celebration!—. Although the base alone comes along with lots of features, we…
Install a rangefinder in the SpeedyBee Mario Fold 8 for accurate altitude measurement. The model is designed to mount the TF-Luna lidar longitudinally to the frame, utilizing the existing mounting holes that are spaced 25mm apart. It is…
This is a scale model of downtown Atlanta, Georgia, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed with…
Rotating XRP Rail Take anything that mounts on the rail of the XRP and rotate it using a servo. Don’t be fooled by its simplicity. This 50mm rotating XRP rail enables some cool stuff in robotics. Get it (1) 9g servo (it should come with a…
This is a scale model of downtown Hong Kong, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed with 0.1 to…
This is a scale model of Pittsburgh, Pennsylvania, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed with…
This is a scale model of the Northern third of the Las Vegas Strip, Nevada, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks…
This is a scale model of downtown St. Louis, Missouri, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed…
This is a scale model of downtown Seattle, Washington, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed…
This is a scale model of downtown Denver, Colorado, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed with…
Base for RPLIDAR A2. Raises the RPLIDAR 46mm to allow it to scan over other objects mounted to the same surface that are less than approximately 70mm tall. All mounting holes are sized for M3 machine screws. RPLIDAR mounting holes are…
Matek Optical Flow & Lidar Sensor 3901-L0X Housing (for FPV/INAV Drones) This is a custom housing designed for the Matek Optical Flow & Lidar Sensor 3901-L0X / PMW3901 module, created to mount securely under The Scout FPV drone (or any…
A case for SLAMTech's RPLidar 360 (A1) that protects the lidar and has room for a raspberry pi zero w. Surprisingly the pi zero w has enough horsepower to process up to 10hz from the lidar while also running hector_slam, telemetry, and a…
This is a scale model of downtown Boston, Massachusetts, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed…
This is a scale model of the Southern third of the Las Vegas Strip, Nevada, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks…
This is a scale model of downtown Warsaw, Poland, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed with 0.1 to…
This wall mount presents two holes for 8mm M3 screws that attach the LiDAR to the mount itself (from the back). And 4 holes for M3 screws to attach the mount to a wooden plank, or wall. 70mm x 70mm x 5mm PLA - 9g - 19mn (M4KS)
This is a scale model of downtown Houston, Texas, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed with…
This is a scale model of Westminster, London, England, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed with…
This is a scale model of downtown Nashville, Tennessee, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed…
This is a scale model of downtown Chicago, Illinois, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed with…
This is a scale model of downtown Detroit, Michigan, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed with…
This is a scale model of downtown Stockholm, Sweden, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed with 0.1…
The Lidar Head was designed in context of a university Project It has the space for 2 Standard Nema 17 Steppers aswell as endstop switches to allow automatic homing to a known position. In The Project, the STM vl53l1x Sensor was used,…
This is a scale model of downtown Miami, Florida, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed with…
This is a scale model of downtown Charlotte, North Carolina, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when…
This is a scale model of downtown Dallas, Texas, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed with 0.1…
This is a scale model of downtown Toronto, Ontario, Canada, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed…
This is a scale model of downtown Amsterdam, The Netherlands, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed…
This is a modified version of the ResinChem Tech's garage parking sensor. He used the TF-Mini for his sensor, but I decided to try the TF-Luna since it was ~$20 cheaper. It works perfectly (I don't mind the shorter range). The wife loves…
This is a scale model of downtown Vienna, Austria, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed with 0.1 to…
This is a scale model of Shibuya, Tokyo, Japan, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed with 0.1 to…
This is a scale model of the Western half of downtown Washington, DC, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best…
Features: compliant, easy to use construction non-intrusive design secure & seamless chassis mounting solution Comments: I briefly tested the driving performance with the mounting kit attached to the minicar and noted a mostly negligible…
Lidar-Modul: https://www.amazon.de/gp/product/B07BFQFRNP/ref=ox\_sc\_saved\_title\_8?smid=A2VMQCTL2044QJ&psc=1 https://www.exp-tech.de/sensoren/entfernungnaeherung/9317/benewake-tfmini-micro-lidar-module Motor (6V/100rpm):…
This is a scale model of Midtown Manhattan, New York, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed…
This is a scale model of the Arc de Triomphe area of Paris, France, designed from LiDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when…
My Xiaomi S20 Plus robot vacuum keeps crashing its LIDAR dome. I just designed and printed a cover cap to protect the LIDAR from impacts. 68mm inner diameter to fit.
This is a scale model of downtown Philadelphia, Pennsylvania, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when…
This is a scale model of downtown San Antonio, Texas, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed…
This is a scale model of downtown Sydney, NSW, Australia, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed with…
This is a scale model of downtown Vancouver, British Columbia, Canada, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when…
This is a scale model of downtown Hong Kong, just East of our primary model, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks…
This is a scale model of downtown San Diego, California, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed…
This is a scale model of downtown São Paulo, Brazil, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed with 0.1…
This is a scale model of downtown Minneapolis, Minnesota, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed…
This is a scale model of downtown Montréal, Québec, Canada, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed…
This is a scale model of downtown Hong Kong, just West of our primary model, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks…
This is a scale model of Cuitat Vella, Barcelona, Catalonia, Spain, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when…
Landing gear alternative insert for the AtomRC Killer Whale that allows for flush mounting of the combined Matek Systems Optical Flow and Lidar sensor. As a fixed-wing, only the lidar is of use, so a hole for the lidar sensor is included…
It's a remix of the original with no support needed. https://www.tinkercad.com/things/fxlI4BvneEF/ Category: Household Supplies
Projekt Leptan (Addon) Project Leptan: Lepta v1.0 RPLidar A1M8 mount including 40mm Fan mount. This mount replaces the TopBar or RingBar. In case of the RingBar replacement the LED ring will not have a place to be mounted anymore. The…
This is a scale model of downtown Phoenix, Arizona, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed with…
This is a scale model of downtown Zurich, Switzerland, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed with…
Printed mine from PETG-CF with high infill (35%) and works beautifully. You'll need a 1/4in camera screw to mount the handle (I used this one:…
This is a scale model of downtown Baltimore, Maryland, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed…
This is a scale model of downtown Tampa, Florida, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed with…
