Bambu Calibration Sticker - Lidar Fix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This will enable the use of calibration and lidar with an aftermarket, thicker build plate. (Such as glass)
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 400
- Makes
- 0
- Views
- 1,663
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This is a Remix / Reupload of DzzD's original “Sticker Holder”. I simply created the image of the calibration sticker to print. The .3mf included is otherwise unaltered except for the size. I use a Tronxy glass plate that is 3.6mm thicker than a Bambu plate. Resize accordingly. Print the calibration sticker at the highest resolution you can. In testing I have used my brother laser printer @ 1200dpi and regular laser paper. Double sided tape and you're in business. I highly suggest a manual bed tramming followed by a full calibration after. Best of luck!
6/25/24 - Image (zipped) upload as PDF died - Print 1200dpi + (Max your printer can do) Install with matte scotch tape over the top. Adds protection as well as limited reflectivity (Bambu camera it moody).