Bambu Calibration Sticker - Lidar Fix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This will enable the use of calibration and lidar with an aftermarket, thicker build plate. (Such as glass)
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 400
- Wydruki
- 0
- Wyświetlenia
- 1663
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a Remix / Reupload of DzzD's original “Sticker Holder”. I simply created the image of the calibration sticker to print. The .3mf included is otherwise unaltered except for the size. I use a Tronxy glass plate that is 3.6mm thicker than a Bambu plate. Resize accordingly. Print the calibration sticker at the highest resolution you can. In testing I have used my brother laser printer @ 1200dpi and regular laser paper. Double sided tape and you're in business. I highly suggest a manual bed tramming followed by a full calibration after. Best of luck!
6/25/24 - Image (zipped) upload as PDF died - Print 1200dpi + (Max your printer can do) Install with matte scotch tape over the top. Adds protection as well as limited reflectivity (Bambu camera it moody).