1 / 3
Donkey Car S1 RPLidar A1M8-R6 Adapter Kit — image 1
1 / 3

Donkey Car S1 RPLidar A1M8-R6 Adapter Kit

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A lightweight adapter for mounting the A1M8-R6 12m range LiDAR sensor kit to the Donkey Car S1 self-driving platform.

Rating
0 / 5
Likes
3
Downloads
43
Makes
0
Views
596
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

Features:

  • compliant, easy to use construction
  • non-intrusive design
  • secure & seamless chassis mounting solution

Comments:

I briefly tested the driving performance with the mounting kit attached to the minicar and noted a mostly negligible impact, although I was far more careful when driving with the sensor kit attached, especially when performing high speed turns. The car sits slightly lower due to the added weight and the rear suspension pair is slightly more depressed than the front pair but it gets the job done near immaculately.

Included files:

  • model step file
  • printer gcode (Prusa Mk3s, PLA)
  • model 3mf file

BOM:

  • 4x M3x8mm screws (for securing the sensor unit)
  • 4x M2x6mm screws (for securing the USB adapter board)
  • 4x paper clip or similar for fastening the adapter to the chassis
  • 1x (short) USB OTG micro to Type-A for connecting the USB adapter board to the Pi
  • RPLidar sensor kit; this adapter design solution is suitable for the following sensor kit:

https://www.seeedstudio.com/RPLiDAR-A1M8-R6-360-Degree-Laser-Scanner-Kit-12M-Range-p-4785.html


 

Tags