1 / 3
Donkey Car S1 RPLidar A1M8-R6 Adapter Kit — zdjęcie 1
1 / 3

Donkey Car S1 RPLidar A1M8-R6 Adapter Kit

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A lightweight adapter for mounting the A1M8-R6 12m range LiDAR sensor kit to the Donkey Car S1 self-driving platform.

Ocena
0 / 5
Polubienia
3
Pobrania
43
Wydruki
0
Wyświetlenia
596
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Features:

  • compliant, easy to use construction
  • non-intrusive design
  • secure & seamless chassis mounting solution

Comments:

I briefly tested the driving performance with the mounting kit attached to the minicar and noted a mostly negligible impact, although I was far more careful when driving with the sensor kit attached, especially when performing high speed turns. The car sits slightly lower due to the added weight and the rear suspension pair is slightly more depressed than the front pair but it gets the job done near immaculately.

Included files:

  • model step file
  • printer gcode (Prusa Mk3s, PLA)
  • model 3mf file

BOM:

  • 4x M3x8mm screws (for securing the sensor unit)
  • 4x M2x6mm screws (for securing the USB adapter board)
  • 4x paper clip or similar for fastening the adapter to the chassis
  • 1x (short) USB OTG micro to Type-A for connecting the USB adapter board to the Pi
  • RPLidar sensor kit; this adapter design solution is suitable for the following sensor kit:

https://www.seeedstudio.com/RPLiDAR-A1M8-R6-360-Degree-Laser-Scanner-Kit-12M-Range-p-4785.html


 

Tagi