Cartographer Probe v3 (Flat Pack) K1 Series Mount(connects to the lidar port)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Reworked model @ZeroDotCMD, does not block the airflow of the model
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 163
- Makes
- 1
- Views
- 1,957
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
In version V2, the hole sizes have been optimized
Simple AF Cartographer - repository thanks to which this model was created
In version 1.1, the cartographer model was added(into step file), the edges were rounded.
BOM:
2x - Heat Inserts M2*5*3.5
2x - Screws M2x6 (with hidden head)
1x - M3X10
klipper configuration
#offsets
[scanner]
x_offset: -21.0
y_offset: 0.0#for k1c
[bed_mesh]
speed: 250
probe_count: 20,20
algorithm: bicubic
bicubic_tension: 0.2
mesh_min: 10,10
mesh_max: 205,200
#for k1c
[screws_tilt_adjust]
screw1: 46,20
screw1_name: front left screw
screw2: 216,20
screw2_name: front right screw
screw3: 216,190
screw3_name: rear right screw
screw4: 46,190
screw4_name: rear left screw
speed: 100
horizontal_move_z: 5
screw_thread: CW-M4
lidar port pinout
For K1 and K1C printers, the lidar prot will not work, you need to run a cable from the motherboard to the printer head, how to do this is described here
use print supports
