Cartographer Probe v3 (Flat Pack) K1 Series Mount(connects to the lidar port)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reworked model @ZeroDotCMD, does not block the airflow of the model
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 163
- Wydruki
- 1
- Wyświetlenia
- 1957
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
In version V2, the hole sizes have been optimized
Simple AF Cartographer - repository thanks to which this model was created
In version 1.1, the cartographer model was added(into step file), the edges were rounded.
BOM:
2x - Heat Inserts M2*5*3.5
2x - Screws M2x6 (with hidden head)
1x - M3X10
klipper configuration
#offsets
[scanner]
x_offset: -21.0
y_offset: 0.0#for k1c
[bed_mesh]
speed: 250
probe_count: 20,20
algorithm: bicubic
bicubic_tension: 0.2
mesh_min: 10,10
mesh_max: 205,200
#for k1c
[screws_tilt_adjust]
screw1: 46,20
screw1_name: front left screw
screw2: 216,20
screw2_name: front right screw
screw3: 216,190
screw3_name: rear right screw
screw4: 46,190
screw4_name: rear left screw
speed: 100
horizontal_move_z: 5
screw_thread: CW-M4
lidar port pinout
For K1 and K1C printers, the lidar prot will not work, you need to run a cable from the motherboard to the printer head, how to do this is described here
use print supports
