Liczymy pasujące modele…
A mount for the cartographer probe on the switchwire/enderwire. It's a remix of the x carriage and the belt grippers to provide clearance for the probe and wires. Mount requires two more heatset inserts into the bottom of the carriage and…
Remixed the shroud to cover the Cartographer and added a simple cable guide for a USB cable with about 3.2 mm in diameter. To use this shroud you also need the remixed Cartographer mount! - I have left the mounting position of the…
Redesigned extruder adapter (Sherpa Mini pattern), redesigned hotend mount (single piece vs two pieces), Beacon probe support. Stuff is being tested, BOM and guides will be added sometimes in the future.
config setting [bed_mesh] speed: 300 horizontal_move_z: 2 mesh_min: 30, 30.5 mesh_max: 225, 225 probe_count: 6, 6 zero_reference_position: 128.00,128.00 [scanner] mcu:idm speed: 10. lift_speed: 10. backlash_comp: 0.5 x_offset: -8.9…
UPDATE : (v1-2, 1 mar 2026) added a cutout for the heater housing on the printhead pcb: BOM : 2xM2 bolt 6mm 2xM2 nut 2xM3 bolt 4 or 6mm 3xZip Tie 2mm width Description : I made this mount for easy printhead removal, allowing the…
This is a modified version of the hook-on dragonburner cowl with screw holes on the side and a mounting piece, which allows operation of the Cartographer probe (or similar). It was designed for my toolchanger but should also work well as…
I just wanted to be able to provide the ability to mount a Cartrographer on this toolhead
New nozzle to probe Y offset is now 21.65mm instead of 22mm.
Default model (stock probe) -- the probe position remains the same as in stock ; no offset correction is required. BOM : Default model (stock probe): heatbreak fan: 1xM2 16mm bolt + printed heatbreak fan-16mm-bolt-mount model fans: 2xM3…
Cartographer V3 Shield mod here Bambu Lab print profile Cartographer V4 Shield Cartographer has a capacitor and a thermistor on the bottom and because of that every little hit can make them fall out If the thermistor is gone its fine, the…
Fixed mount for cartographer (v3 and v4) probes for e3ng users that have the Goliath air hot end. Stock file is about 4mm too far off build plate for accurate reading. This Mod/Fix lowers it to the required distance… As well as moves the…
A Base to mount a Dragon Burner, Cartographer V4, and a magnet to trigger the XY hall effect endstop to and MGN12H rail.
On my Salad Fork 1.1 build, I chose to use: AntHead tool head Rapido 2 (High Flow hotend) Cartographer v4 probe Needed Hardware: z_carriage_rear_carto: 4x M2x4 SHCS The salad fork manual calls for M2x6 screws which are too long with my…
Choose the version which you need for your printer. This Remix has support for - Cartographer Cartographer v4 low-profile & should be backwards compatible with Cartographer v3 low-profile Beacon Beacon D low-profile & potentially Beacon H…
Modified carriage for servo cutter using BootyCallJones X-rail mod. Works with stock toolhead board, EBB42 Gen2, MicroSwiss FlowTec and stock part fan ... no chain ! Extruder is for 4mm tube or ECAS04, seperate entry for 5th gate (in my…
I am using sensorless xy homing, so I wanted this improved/modified version without the endstop switch part.
There are three mounts, one each for cartographer v3, v4 and beacon revh. I am slowly adding heat set insert variants too This will not work with the original shroud or the original hotend, you might need to scale the mount horizontally f…
Cartographer V4 probe mount designed for the Sovol SV08. Print: 1x (Cartographer v4 Mount) 2x (3.25mm tall ID 3.2mm OD 6mm Spacer) (these spacers slide on the screws that came with your cartographer mount) Probe Offsets (add these to your…
If you wish to use the Cartographer3D with the original lid riser, there's no straightforward route for the USB cable to follow, meaning that not only do you have to drill or file a hole, but you need to make it large enough for the plug…
I wanted to run a shuttle that contained the x endstop and z probing independent of the toolheads on a madmax system. I was also having trouble getting the toolhead probe working reliably enough and this was an easy way around that. The…
Print Settings: Same as Original. Better to print in ABS / ASA. Changes needed in the k2-improvements configs: Edit cartographer.cfg file: [cartographer] mcu: cartographer x_offset: 0 y_offset: -30 And: [bed_mesh] zero_reference_position:…
My first bigger project! This is a complete board for the game cartographers (Kartograph), but you still need to buy/have the base for the playing cards. This is still WIP as a few parts are not yet done (Box top, mainly). But the board…
Cartographer mount for Yavoth UHF cowl. Just add spacers for your Cowl/Hotend combination.
Cartographer V4 Shield here Cartographer V3 Shield Cartographer has a capacitor and a thermistor on the bottom and because of that every little hit can make them fall out If the thermistor is gone its fine, the probe can work without the…
Step included Smart Orbiter v3, only the original hotend was tested so far, soon the revs nozzle version will be tested and file updated if needed. Beacon probe (standard) (only tested Rev H, but I think Rev D should work too) or…
remixed RapidBurner X Carriage MGN9H for Micron and Pandoras Box to include a mount for Cartographer or Beacon probe
I used the original model as a reference for dimensions. There are many differences from the original model. Thanks to the Bootycall Jones. I had trouble getting a good print of the original model. The overhangs and bridges were hard for…
This is my attempt at a probe for the cartographer that I just got home. I wanted something a bit more rigid than the current options, as it has to be very rigid for Cartographer Survey. I plan to add some wire guide option on the side,…
The wires of the probe are a bit thick so I had to shave away some material where the hotend assembly and the extruder base meet.
I ran with a Tentacool nozzle duct for a while, but noticed it was lacking in flow. I also needed a new setup due to me using a BD Sensor M, so I started working on a new simple duct system for my Artsy printer. Which also made it work on…
This is a simple Jig for assembling the Cartographer probe in a 90 degree configuration. Insert the JST Socket with the pins facing up, solder it to the MCU board, then flip the whole assembily over and solder the 90 degree pins to the…
I have NOT tested this to see if everything works properly yet! I included the STEP file in case anyone is way smarter than me in this regard and can correct any mistakes I've yet to realize. I have been working on getting all the parts…
A remix of McSneaky's Carto mount to fit the standard profile version. Untested in action as I haven't installed it yet. But fits great as far as I've tested.
ENGLISH adaptater cartographer stealthburner SirStorm This is an adapter model for the SirStorm stealthburner support it allows height adjustment it is suitable for standard and flat versions v3 FRANCAIS adaptateur cartographer…
Right Angle Cartographer Mount This mount is designed to be used with the Cartographer 3D Right Angle V3 probe. This is a side mounted design, featuring zero Y offset, reducing the effects of Axis Twist . Help support my work with Ko-Fi…
X-Axis Limit Switch Extention Block_For CNC TAP and Cartographer Mount Only used for CNC gantry parts that don't extend low enough to trigger the end stops on the Voron 2.4 Required are 3 M5 Button head or Socket head screws, Length will…
Remix of Steffen's design for Cartographer cable guide. It has been tidied up, slimmed down and added a slot for a zip tie. This is for when you are using the LIDAR cable for a cartographer or other probe. Credit goes to Steffen for a…
Version 2 is out now. https://www.printables.com/model/1384285-shroud-for-neptune-4-plus Took the V6 prototype from OrzOrzOrz and remixed it. Add cartographer mount and some cable routing. Put on a Tie Fighter design to the 5015 fan covers.
A mount for the cartographer probe on the switchwire/enderwire. It's a remix of the x carriage and the belt grippers to provide clearance for the probe and wires. Mount requires two more heatset inserts into the bottom of the carriage and…
This simple tool helps find the proper offset for your Cartographer probe in relation to your nozzle tip. Having a 2.6-3mm Z offset is critical for reliable operation of Cartographer Touch (nozzle probling). The Y offset ruler is just a…
I recently got into the game Cartographers. There are not a lot of cards, comparatively, but the game box did not come with a holder or organizational insert. I created this simple insert to fit in the box and hold 2 stacks of sleeved…
Mounting plate for StealthBurner for Elegoo Neptune 4 with mounting holes for Beacon3d or Cartographer probe. I currently use it for my Stealthburner with cartographer and volcano, rapido and TZ v2 hotends, so my Stealthburner a little…
Just a simple remix of booty call jones linear rail carriage. It allows to use directly Libra extruder. No need to remove material from the carriage, simply print it directly to fit Libra (and Trigger - not tested) extruder. Update…
Printed with standart voron print settings
Struggling with inconsistent first layers, wavy patterns, gaps between lines, nozzle digging into the build plate or leveling related error codes? Been told to adjust your z offset? Looked at your bed mesh and tried to adjust the bed? Not…
Mount a Cartographer onto your Creality CR10 v2! Mounts in the stock location BLTouch installs. Designed to fit around Micro Swiss NG but may fit stock setups as well! If anything would need minor adjustment to the length. Requires…
In version V2, the hole sizes have been optimized Simple AF Cartographer - repository thanks to which this model was created In version 1.1, the cartographer model was added(into step file), the edges were rounded. BOM: 2x - Heat Inserts…
Cartographer mount for Enderwire with Dragon Burner. The mount can be used with standard edition, but you will have to use the belt clamps with cut as otherwise, the socket won't fit. Thanks to @PiotrChaos, it seems the mount can also be…
I noticed that PropFortress' Beacon mount lines up perfectly with the mounting holes on the Cartographer, but does not have clearance for the solder joints and the upper PCB. So I decided to try my hand at editing a model. This is my…
I love the Cartographer 3D probe, but I had some trouble getting the offset configured correctly. While there’s an offset tool available, it didn’t quite suit my specific needs. To solve this, I designed a simple but helpful tool to…
Official Skeletor MK7 Side Mounted Cartographer Support: https://www.printables.com/model/1362668-skeletor-mk7-side-mounted-cartographer-integration PSA 7/14/25 * If you're here to download the Right Angle Mount for your K1 Max please…
Added a cutout to be able to run a cartographer cable out to the front usb port.
A modification of Esoterical's tool to determine the Cartographer probe offset with respect to the nozzle. This mod helps with printers that have the probe offset in the X direction rather than Y. See original tool description here:…
Most of this collection is remade from scratch, the only part that is truly a pure remix is the player boards from thing:5819558 as I removed their text and added mine in and then copied the coordinates to the right side and the bottom. I…
This mount comes to you courtesy of Tinkers Paradigm as we embark on a BLV Cube/Trident build to be published on our Youtube Channel. This is a modification of the base design to allow mounting and use of a Cartographer3d Probe and…
Want to show appreciation? Consider checking out my Ko-fi This is a fairly simple mod that joins the BTTEddy Mount remixed by @anavrin72_1904362 and joins it to the K1 D3vil Burner & Booty Burner cover by @MzTechnology_2076066 I have also…
remix to add M3x3x4.5 threaded inserts to hold cartographer. print at 45 angle no supports needed Cartographer 3D offset is Y axis -22mm. V2 has 2 front mounts. add 2nd fan mount to strain relief. 2 versions, inner or outer of fan…
recommend using version with threaded inserts as it much stronger mount for cartographer 3D. https://www.printables.com/model/1138393-skeletor-mk6-with-low-profile-cartographer-threade remix to add M3x1.8mm hex nut pockets to hold…
Been looking for a Beacon/Cartographer mount for the SV06+? It's right here! Built extra beefy that's meant to last, minimize any possible deflection to give accurate probe readings Does not use the 2 cooling fan holes so it fits many…
This innovative model introduces compatibility with a plastic brusher designed specifically for effective nozzle cleaning. Additionally, the model supports Cartographer 3D Please prefer to use ABS or ASA filaments. UPDATE 13/4/25 I…
Cartographer3D Mount for Qidi Plus 4 ⚠This was a fun proof of concept to get Cartographer working on the Plus 4, but Stew's Beacon mount will serve you much better, please use that instead.⚠ I am leaving this page up as a resource to the…
A simple upgrade for the stock shroud for Cartographer / Beacon. Unlinke the other files, this one fits for the Neptune 4 plus… Just print like is with suport and stick the side without screw with dubble sided tape or super glue. my…
So you have a K1 or K1 Max and you have all the big upgrades, including the Booty Call Jones linear rail, the Skeletor MK7 duct, and now you're trying to install a right-angle (or standard format) Cartographer3D probe. This carto mount…
I'm using it on my printer with auto-z without issues , but it might not be rigid enough for input shaping.
This is a fully adjustable mount for the Cartographer probe on the front of the E3NG toolhead. It allows for up/down adjustment as well as rotational adjustment to help ensue it's level to the bed. Put 1 3mm heatset insert into…
I recently build an LDO 300 Trident with a Cartographer probe and wanted to use the decontaminator bucket/arm. But since they recommend using a silicone brush from Bambu (for obvious reasons) I had to modify LDOs model to raise the…
You can't really use the cnc belt teeth, as the belt needs to be in front in an mgn9 setup. I use these in addition to the metal clamp provided with the cnc toolhead carriage.
build is exactly same as cw2. Knomi V1 untouchable is tested and is working fine, it should also be compatible with knomi v2 but it is not yet tested.
Ich habe die Stealthburner Aufnahme vom Tapchanger mit dem Cartographer erweitert. Um diese zu nutzen empfehle ich eine slim Version, damit beim ab oder andocken der Cartographer nicht getroffen wird, oder ihr den Druckkopf aus dem Dock…
After a lot of work with @JaminCollins we are ready to release the cartographer for the K2 Plus! If you would like to support my efforts, buy me a beer . I want to keep my projects free, and your support helps me do so. Getting this all…
Needed some clips to hold the usb cable for the cartographer probe. Made modifications to SHaDoW6's clips.
This is a mount for the Cartographer3d eddy probe. I used the standard probe but the right angle model would probably fit better. The original inductive probe mount location and hardware is used. two M3x5x4 heat set inserts are used for…
This is a 2-piece front shroud to mount the Cartographer3d probe on the Creality K2. Thanks to JaminCollins k2-improvements script ( https://github.com/jamincollins/k2-improvements ) we got to ability to use the Cartographer probe instead…
Triangle labs v6 nozzles are 1mm longer then normal v6 so hot end was sitting to low and it was messing with my cartographer mount. I calculated the difference from my Dragon HF mount to make it exactly the same Dragon hf is 45.5mm Dragon…
(Untested) The name says it all
Remixed the shroud to cover the Cartographer and added a simple cable guide for a USB cable with about 3.2 mm in diameter. To use this shroud you also need the remixed Cartographer mount! - I have left the mounting position of the…
Updated model with thicker carto mount, brim and rounded corners to help with warping during printing. Also updated for Cartographer v4 You can adjust the mounting hole sizes and height of the PCB to tweak as needed with the VarSet…
I've tried the original model and the remix. I found that the remix is not flush (at the bottom of the DB) because there is no room to route the BBL hotend wires. With this version : there is enough room for wires belts clamps are…
Summary: This is my version of the cartographer mount and shroud to install the cartographer PCB apart from the coil board. I wanted to get rid of the spacers in the y-axis which are needed for the regular installation. Because of the PCB…
DISCLAIMER: YOU ARE GONNA NEED TO CUT A SMALL PIECE OF THE ORIGINAL SHROUD OTHERWISE THIS WON'T FIT OR USE ANOTHER SHROUD DESIGN [ 955271-sv08-toolhead-cover ] Give this a read before you start and follow it to calibrate the probe […
Target If you don't want to mess with the backside PTFE tube gasket, use this minimalistic lid raiser to route the Cartograpers3D USB cable to the external USB port. For all others who are looking for a lid raiser to stop the PTFE tube…
Summary: This is my second version of the Cartographer mount and shroud to install the cartographer PCB directly above the coil board. The goal was still to get rid of the spacers in the y-axis which are needed for the regular…
Summary: This model is an addon for a Cartographer installation, e.g. like my model version 2 of the mount and shroud that can be found here. https://www.printables.com/model/1277242-k2-plus-cartographer-mount-and-shroud-custom-pcb-p I…
Edit: You must remove the RGB, I2C, and PROBE pin headers on the EBB42 to fit the tested models. I desoldered the pin headers, but cutting them off with diagonal cutters is probably good enough. I added an untested version of the x0 arm…
I got tired of removing the two bottom screws every time I needed access the rear of the printhead, so I remixed the probe mount and a rear printhead cover so you can remove the rear cover separately, and the probe remains attached to the…
Get a cartographer on neptune 3 pro with a stealthburner toolhead with a TZ v6 2.0 hotend Print with ABS/ASA with voron setting . Heatset insert instruction here from Cartogapher site. If any question ask.
This is a double Horn cooler for EVA3 with a Mount for the Cartographer 3D or Beacon Eddy current probe. it suits all non volcano style Hotends. It features a clip to wire up a JST-PH connector for USB or CAN use.
Redesigned extruder adapter (Sherpa Mini pattern), redesigned hotend mount (single piece vs two pieces), Beacon probe support. Stuff is being tested, BOM and guides will be added sometimes in the future.
Only difference is the cutoff, so print it as original one
Redesigned from scratch. Improvements compare to original: 1. Fixed distance between holes: 31.5mm instead of 31mm 2. Fixed hole sizes for M3x3 heat inserts 3. Fixed thin walls by using part of Klicky probe mount 4. Reduced area which was…
recreated from https://github.com/Cartographer3D/cartographer-probe/tree/main/STEP
The Cartographer 3D mount has been modified as it has two separate boards (processor and coil). The board with the chip has been moved further away from the hot bed. The coil and the board are connected by four wires. For mounting you…
I've tried a few different shroud/mount combos for mounting my cartographer to the toolhead on my Creality K2 Plus, but none of them seemed to really work for me very well. The magnets never seemed to be able securely lock together. And…
Remix of @PURCELL3DPHUB Cartographer right angle mount for the Creality K1 series. This sits slightly higher above the nozzle and prevents the screws touching the bed. I'm not great at modelling and still a beginner so the quality may not…
This model prevents errors during printing caused by poor contact when connecting the Cartographer via stock USB cable. Attach thin double-sided tape.
Use this model to check nozzle offset At the moment, to use cartografer in ratos you need to disable adaptive mesh in your printer.cfg [gcode_macro RatOS] variable_adaptive_mesh: False at the end of [gcode_macro _START_PRINT_BED_MESH] add…
So the instructions are really simple: Get the nozzle touching the bed (you can use a bit of paper to make sure of this) Then make sure the 2.6mm side of the tool can slide under the coil of the carto The 3mm should not be able to slide…
Insert / organizer for Cartographers. Design for sleeved cards. Insert / organizér hru Kartografové. Navrženo pro obalené karty.
fit for https://www.printables.com/model/1170120-beacon3d-mount-for-qidi-plus4 cartographer mount
