Trident Decontaminator Silicone Brush For Cartographer/Beacon Probe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Silicone brush holder for LDO Trident with Carotgrapher/Beacon
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 418
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently build an LDO 300 Trident with a Cartographer probe and wanted to use the decontaminator bucket/arm. But since they recommend using a silicone brush from Bambu (for obvious reasons) I had to modify LDOs model to raise the holder. I added some retaining to hopefully assist the adhesive in keeping it in place. You may need to trim a little of the brush off since these are widely available from many manufacturers. Print the arm below and the bucket from the original decontaminator files.
https://www.printables.com/model/889734-ldo-trident-mount-for-decontaminator-purge-bucket
