Trident Decontaminator Silicone Brush For Cartographer/Beacon Probe
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Silicone brush holder for LDO Trident with Carotgrapher/Beacon
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 61
- Makes
- 0
- Views
- 419
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently build an LDO 300 Trident with a Cartographer probe and wanted to use the decontaminator bucket/arm. But since they recommend using a silicone brush from Bambu (for obvious reasons) I had to modify LDOs model to raise the holder. I added some retaining to hopefully assist the adhesive in keeping it in place. You may need to trim a little of the brush off since these are widely available from many manufacturers. Print the arm below and the bucket from the original decontaminator files.
https://www.printables.com/model/889734-ldo-trident-mount-for-decontaminator-purge-bucket
