Creality K1 Cartographer RA mount V3-V4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lightweight right angle cartographer mount and a FreeCAD file with VarSet to make easy changes.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 176
- Wydruki
- 0
- Wyświetlenia
- 1531
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Updated model with thicker carto mount, brim and rounded corners to help with warping during printing. Also updated for Cartographer v4
You can adjust the mounting hole sizes and height of the PCB to tweak as needed with the VarSet variables.
Hardware used:
(2) M3x16MM self tapping screws
(2) M3x5MM low profile hex machine screw
Pick the PurcellV5 mount. X offset -18.665
Printed with ASA, PLA can warp during use. I printed with support for carto mounting holes.
It is helpful to briefly heat screws (2-3 seconds) with a lighter to help with self tapping.
VarSet note:
Mtg_Hole_to_Coil (34.4mm) is the distance between the mounting hole and coil with the Coil_to_Nozzle_height set to 2.8mm on my machine. If you find the measurement is not 2.8mm after printing make the adjustment by changing Mtg_Hole_to_Coil for your machine.
Simple AF docs can be found here:
https://pellcorp.github.io/creality-wiki/