1 / 5
Neptune 4 and 4 Pro StealthBurner with Beacon/Cartographer Mount — zdjęcie 1
1 / 5

Neptune 4 and 4 Pro StealthBurner with Beacon/Cartographer Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

StealthBurner with Beacon for Elegoo Neptune 4 and 4 Pro

Ocena
0 / 5
Polubienia
22
Pobrania
93
Wydruki
0
Wyświetlenia
1592
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Mounting plate for StealthBurner for Elegoo Neptune 4 with mounting holes for Beacon3d or Cartographer probe.
I currently use it for my Stealthburner with cartographer and volcano, rapido and TZ v2 hotends, so my Stealthburner a little bit longer.


Big thanks to Spikeon Studio for model and access to cad!

Models that I used:
StealthBurner V6 Volcano/CHC Pro Hotend - check here
StealthBurner TZ v2 Hotend V6 style heatsink - check here
 

For wiring toolhead I used BTT EBB SB2209 (RP2040) with U2C V2.1 and connected probe with CanBus
It is possible with stock Elegoo toolhead board, but CanBus is much cleaner solution

If you have any issue with tolerances or need to change mounting holes location feel free to make any changes with provided step file or write in a comments

If you use other hotend and you definitely want to change length of beacon mount, you can try to edit online in onshape cad check here (WIP)

Tagi