SV06/+ Cartographer/Beacon Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my attempt at a rigid mount for the Cartographer/Beacon probe.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 67
- Wydruki
- 2
- Wyświetlenia
- 524
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This is my attempt at a probe for the cartographer that I just got home.
I wanted something a bit more rigid than the current options, as it has to be very rigid for Cartographer Survey.
I plan to add some wire guide option on the side, ideas welcome!
The mount uses an M3 heatset on the right side and a long M3 bolt for the left, into the toolhead.
The right side uses two M3 thin flat-headed screws.
The Y-offset is -17.744mm
Please leave a comment if you need any alteration made!
You can context me on Printables or in the Cartographer discord: https://discord.com/invite/EFSwpureHz