Qidi X-Max 3 Beacon / Cartographer (low profile) mount and rear printhead cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You can remove the rear printhead cover without removing the probe
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 390
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v2.0
I got tired of removing the two bottom screws every time I needed access the rear of the printhead, so I remixed the probe mount and a rear printhead cover so you can remove the rear cover separately, and the probe remains attached to the printer with the two bottom screws. Follow the instructions from Mc Sneaky to install the probe: 692991-qidi-x-max-3-beacon-cartographer-probe-low-profile. I'm also using the low profile cartographer.
If you're having issues with the cartographer disconnecting and causing the print to fail, install kalico instead of klipper and mark the cartographer as non-critical. If you're having an inconsistent z offset or the nozzle crashes into the bed during nozzle touch, try installing the scanner.py from this pull request: 240