DJI Lidar to 15mm rods attachment.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Should be quite simple. For on a 15mm rod rig. With 60mm spacing between rods. includes a cover for front protection.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 147
- Wydruki
- 0
- Wyświetlenia
- 548
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted the lidar unit of a DJI focus pro set underneed just in front of the matte box of my video rig.
For a 15mm rod rig. With 60mm spacing between rods. (Smallrig shoulder rig for example)
Uses m3 hardware: 2x bolt, nut and washer. Exact length of bolt should be no more (or a little less than) 20mm in order to prevent hitting the expensive lidar module! Prefit before attaching the lidar and file bolts down when bolts are protruding is my advice. I had to do this myself to prevent damage! Use on your own risk!
Small cover is fixed with a little tape… KISS principle. (Or you may call it lazy designing).
Prints without supports. Use something strong like PETG. I use 3 perimeters for parts like this.
I'll add some more pictures soon.