1 / 2
Adafruit Neokey 1x4 and Seeed Studio Xiao Macropad
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've designed a simple macropad using the Adafruit Neokey 1x4 PCB and a Seeed Studio Xiao microcontroler.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 692
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (20)Powiązane
I've designed a simple macropad using the Adafruit Neokey 1x4 PCB and a Seeed Studio Xiao microcontroller.
Since all Seeed Studio Xiao microcontrollers as well as all Adafruit's QT py microcontrollers share the same dimensions, any of these should work fine in this enclosure.
Requires 4x M2.5 x 4mm screws.
No supports are needed.