Sinkor light - hang on system.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sinkor light hang on system which works as side profile cover.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 228
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Sinkor light initially did not offer any hang on system, so I design my own.
To mount it is necessary to remove stock side covers. There was used 2 types in past, both are glued by hot-melt glue and superglue - not easily to remove.
Used hanging system: Kanlux 07870 ROPE-NT 150
https://eshop.kanlux.sk/rope-nt-150-ocelove-lanko-pre-zavesenie-svietidel-ofra_d27691.html
For best look I recommend to replace stock cable with transparent one:
https://www.obi.sk/silove-kable/silovy-kabel-heilight-transparentny-2-x-0-75-mm2-metraz/p/4342598
Printer: MK3S
Noozle: 0.4mm
Layer heigh: 0.2mm
Material: PETG, maybe even PLA would work fine
Support: not needed
Brim: optional, I prited mine with brim enabled
I printed mine with own text (visible on photos), uploaded modes are without this text.
Enjoy and happy printing ;-)
PS: you can find my aquascaping work on instagram: https://www.instagram.com/planting.peet/