Sinkor light - hang on system.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sinkor light hang on system which works as side profile cover.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 228
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Sinkor light initially did not offer any hang on system, so I design my own.
To mount it is necessary to remove stock side covers. There was used 2 types in past, both are glued by hot-melt glue and superglue - not easily to remove.
Used hanging system: Kanlux 07870 ROPE-NT 150
https://eshop.kanlux.sk/rope-nt-150-ocelove-lanko-pre-zavesenie-svietidel-ofra_d27691.html
For best look I recommend to replace stock cable with transparent one:
https://www.obi.sk/silove-kable/silovy-kabel-heilight-transparentny-2-x-0-75-mm2-metraz/p/4342598
Printer: MK3S
Noozle: 0.4mm
Layer heigh: 0.2mm
Material: PETG, maybe even PLA would work fine
Support: not needed
Brim: optional, I prited mine with brim enabled
I printed mine with own text (visible on photos), uploaded modes are without this text.
Enjoy and happy printing ;-)
PS: you can find my aquascaping work on instagram: https://www.instagram.com/planting.peet/