Zotac GTX1070Ti Mini fan shroud
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement fan shroud for a Nvidia Zotac GTX 1070Ti Mini.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 318
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
In the “because I can” category…
When the stock fan on my Zotac 1070Ti Mini failed, I got a replacement from inRobert. It turns out I ordered a 1070Ti fan instead of a 1070Ti Mini fan. The only difference is that the diameter of one of the replacement fans is 4mm wider than the stock set. And the original fan shroud did not fit. Why the Zotac designers chose to use fans with a different diameter, I do not know.
Instead of using inRobert's excellent replacement policy, I designed this replacement. I chose not to reuse the lighting from the original shroud. The shroud is mostly to protect the fans. I'm not sure how effective a shroud is for channeling the airflow on this card, compared to the bare fans. I saw no noticeable temperature increase running the 3DMark Time Spy benchmark.
Printed using Hatchbox PLA Blue, 0.2mm Quality 15% infill profile in PrusaSlicer. Slice with the screw tabs on top, using organic supports.
The original screws were not long enough, so I replaced them with generic M2x6 socket head screws that I had laying around. The screw shaft projects out the bottom of the mounting tabs, well clear of the heat pipes.
OpenSCAD source, STL, and 3MF models included.