DIY Half Moon Switch Velcro Mounted
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Friend asked me to model the enclosure and use velcro as mounting due to having no tapped holes underneath.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Share Alike
Uploading model i made for a mate. This was my first model I have made with cad, so it may not look the best. Split the .3mf file in slicer and print.
As this was for a friend, i can write what components were used to test fit, so I'm not sure on what they are called, this is what my he said it required:
- Ernie Ball 6371 3-Way Strat Switch
Not sure on the cables he used to solder to it, but he said he went onto the nord forums and searched online as well, it should be similar soldering and installation.
Hardware Requirements:
- 4x m3 x 8 cap head screws
- 2x m3 x 3 x 5 Brass inserts
- Hook and loop Velcro
I used brass inserts due to having them around, plus also testing tolerances.
Gif shows mate testing the switch.
Printed in ASA.
I have uploaded the .3mf and .step files if you wish to edit them yourself.
Thanks