1 / 7
Two-story house / dvoupatrový dům
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a model of my sister-in-law's real house and gave it to her for her birthday party :)
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (13)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
If you want to have your own model of your house, feel free to contact me :)
Assembly instruction:
- glue all three parts of the stairs together - use “support under the stairs” and then insert the stairs into the model - see details in picture in gallery
- insert the “inserts” into the model be careful there are different for first floor and for the second floor - it depends on your printer settings - maybe it needs a little sanding
- connect the “truss” with “collet” with M2x10 bolt, glue the upper part of the “truss” together
- Print the “roof” twice. Use the magnet dia 6mm, thickness 3mm to connect “roof” and “ceiling-2NP” - you will need 8pcs of the magnet. Or if you don't want to have it opened glue the roof
- If you have some other question don't hesitate to ask ;)