Liczymy pasujące modele…
TrackVision - The Open Railway Project Welcome to the TrackVision ecosystem! This is a comprehensive, custom-designed model railway project built from the ground up for makers. It features a unique, non-standard scale engineered…
The left cap of the Celexon projector screen tends to break. I made a sturdier version. It's possible to use it without the metal-angle-insert, but it's more stable with it. Important info: The gap is very narrow, so please insert it…
Nikon bayonet mount to use various projector lenses on nikon camera's. The inside barrel width is 44mm wide and fits the Leica Elmaron 1:2.8/100mm and Leica Hektor -P2 1:2.8/85mm projector lenses PLA printed
These are holders for “ SteveJohnsen ”s custom projectiles. His projectiles are used for Adam-M 's "Catapult Card". There are 3 different sizes for my holders. 2x2, 2x4, and a 4x4. They all can hold SteveJohnsen's discuses. (I think, pls…
The bracket is barely noticeable and allows the projector to be mounted simply by sliding it into place. It is ideal for flexible use in different rooms, such as the home theater or bedroom.
Here is a 3D printed base for three MB-102 type breadboards (from Aliexpress). I designed it using Tinkercad. Print the base, face down. It measures approx. 20 x 18cm and can take about 15 hours with 15% infill at 0.2mm resolution if…
This is a modular case for the RAK WisBlock Starter Kit with the 19007 baseboard. The idea behind this project was to make a simple-to-assemble and customizable case and also eliminate screws, washers and fasteners other than those that…
Video Series Link: This is my entire Daedalus Upgrade project that I've been working on for the past 4-5 months. I've uploaded all of my files here for you to embark on this journey if you'd like or take parts of my build and make it into…
I needed a holder to keep my projector slides organized and safe, so I created one on Tinkercad. I printed it in PLA using Inland Wood Rainbow and Inland Light Blue PLA for the label on my Bambulab A1.
I created this Ikea Mosslanda support for an old video projector I had lying around. The piece slides smoothly from any side of the shelf to the desired position and stays in place when the projector is placed on top. In my case, I…
The Holoprojector is a communication device used throughout the Star Wars galaxy. It is a small, handheld device that can be used to project a holographic image of another person or object. Holoprojectors are commonly used by military…
Designed a Magsafe dock adapter for dbrand's project killswitch! It is designed to fit the Spigen Magsafe adapter, but the generic ones work just as well. Get the other side of the mount part (UMM_Lock_V4.STL) at…
Uploading a few old designs. If you want to support my work and all of the free designs I bring to the community consider buying something from my Etsy shop or my Printables Store . _______________________________________________________…
This 3D-printed battery holder is designed to securely hold six 21700 lithium-ion cells in a 3S2P configuration . Delivering 11.1V nominal output, it’s perfect for compact and lightweight battery builds, whether you're working on RC…
This mount is sizedto hold the Caldigit TS3 laptop dock and has a crossbar and a slight lip to ensure that your laptop dock fits snugly in place for connecting/disconnecting cables. It leaves the front and back of the dock exposed and…
Collections available Losi MicroT Spinner & Fidget Arrma RC Earrings
The AirCowl is a 3D printable personal cooling system that transforms a standard PC fan into a comfortable, wearable neck cooler. Perfect for hot summer days, outdoor work, or anyone who runs warm, this innovative design provides targeted…
this is an adapter bracket you need to make the awesome morimoto M-LED 2.0 to fit inside your TYC brand projector headlights for 2013-2018 ram and 2019-2020 ram classic Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
While Thermal take dosent recommend it, you can install the MSI Project Zero motherboard and its an amazing combo. However there are definitely some issues, one of them being the power cable interference with the SSD/HDD tray in the back.…
EnergyMonitor Arduino energy monitor, using SCT-013-030 current sensors Project Links : Software part, on GitHub Hardware part, on Thingiverse This is a full energy monitor project : You can manage 1 to 6 sensors. You can configure it…
This is an insert for the Kickstarter version of Project L that houses all of the expansions inside. The tile tray has room for one spot to hold the Ghost piece and Ambassador tiles in it, and the other two can split the white and black…
Experience the cutting edge of automotive innovation with this 3D printable STL model of the Mercedes-Benz AMG Project ONE. This futuristic hypercar model is perfect for automotive enthusiasts and fans of extreme performance, showcasing…
This is my second version of a projector mount utilizing ~21.5mm PVC pipe meant for outdoor use. This version is stronger, more stable, and more versatile in terms of the ground you place it on. I've only tested with the VANKYO…
I received the XGIMI MoGo 2 as a graduation gift and absolutely love it. The only problem? When I set it on my bedpost, it would shake every time I moved. I had two options: spend $79.99 on the official angle mount… or design my own. So,…
Micro was my very first project that I designed entirely from scratch . While it was loosely inspired by a concept from Optimum , the Nano Rig . I pushed the idea further: making it even smaller, simpler, and built without a dedicated GPU…
I had an old wooden tripod at home and I wanted to make a lamp with an industrial projector, but I couldn't find a cheap
This Advent, I’m designing a fully modular Playmobil-scale cat tree for my daughter – and I’d love to take you along for the journey! Until Christmas, I’ll be collecting ideas and posting updates every few days. Feel free to suggest…
I made this to fit an Ikea headboard for a mini projector.
UPDATED VERSION ON MAKER WORLD HERE: https://makerworld.com/en/models/2507483-not-a-smena-8m-rev-3-35mm-camera-project This is a work in progress and I am posting it in case anyone wants to join me on this little journey of learning how…
remix of moon model so that I can mount an astronaut star projector figure
Do you have a large lens with no filter threads but want/need to use filters. This model attaches to the barrel of the lens and lets you use one or two 100mm square filters. I believe any brand of 100mm filters. If you need to re-size…
Replacement battery cover for BenQ projector remotes. Compartment dimensions: Opening: 75mm x 35mm Fits 2x AA batteries Mechanism: Slide-in tabs on one end, cantilever snap catch on the other. Print orientation: Right side up (top face…
Highly recommended to Use ABS filament. You gonna need a hardware 8pc M4x10 or 12mm bolts 8pc M4 lock washers or a locktight 8pc M4 nuts
Who I am: I'm a nerd girl, full-time student with a degree from the Academy of Fine Arts in Venice (but now I study cognitive processes and technologies, cyberpsychology). I don't work with 3D printing and I use my printer 90% for…
This is my first version of a custom body for the Losi Micro-T. It is designed to work just like the original shell, with the rear pivot mount and front Velcro attachment system. ⚠ Please note: this is an early version and far from…
The Concept I designed this stand because I wanted a clean way to display photos on my desk without the visual weight of a full frame. The goal was to mimic the look of bent lamination (bentwood), keeping the focus entirely on the image.…
Overview Ultimate Egg Drop Capsule Cub Scouts, Classroom or STEM Projects This project started as a Cub Scouts egg drop challenge for my grandson and turned into one of those builds that was just too fun not to share. A 3D-printed,…
I modified the cord insert to snuggly hold the USB cord: https://a.co/d/96o6vXl I created a base that fits perfectly with the Moon Model from Artificial World, that allows it to be single unit. A tall and short version included Printing:…
Ceiling Mounting Bracket for NEC NP610S Projector You can print it on a Prusa Mini Printer If you need other designs for other projectors, let me know.
After a year and a half the SV08 toolchanger mod has been released. In collaboration with DraftShift design, their Stealthchanger mod for the Voron 2 ( https://github.com/DraftShift/StealthChanger ) has been adapted to the SV08. Due to…
A compact 3D-printed star projector designed to sit directly over an iPhone’s camera and flashlight. The cube-shaped cover features rounded edges and precisely cut star patterns on all sides. When the phone’s flashlight is turned on,…
Tired of a harsh ride? Welcome to the "NeoBall Rocker 3B Tripod" – a quirky, functional, and completely 3D-printable bike suspension project! This isn't just another bracket; it's a clever rocker mechanism that uses a few humble tennis…
Entworfen bzw. angepasst im Rahmen des „ PrintClosure Project “. Das Modell dient der Führung des Filaments, speziell bei vollen Rollen. Es verhindert, dass das Filament von der Rolle springt. Nähere Details sind hier zu finden.…
If you are, for example making a mini room as a project this is something cool to include in that
Das Modell ermöglicht es, das Filament in das Gehäuse des „ PrintClosure Project ” zu bringen. Der Deckel meines Gehäuses ist 3 mm dick (ich habe Acrylglas verwendet) und es ist eine Bohrung mit einem Durchmesser von 14 mm erforderlich.…
EN: Stand for XGimi Halo+ projector allowing to tilt the projector to get maximum from the projected image. How to print: Print from PLA or PETG. Models are optimized to reduce needs for supports. 1x Outer part 1x Inner part 2x Nut…
This is an ESP32-CAM box, made specifically because no other case existed for what I needed
I needed to use a right-angle USB cable to keep things clean and not sticking out the sides of the cube, so I made this remix. Print as you did with Side1, and everything should work fine. Made to work with this model: I used this USB cable
I really wanted to have an all-in-one type console that had an NFC card slot to launch games and this ejector mechanism is great. I combined it with the footprint of the DE10 Nano stack - MiSTer project CUBE case. To keep things very…
Introduction Today is my twelfth birthday (Jan 31st) and what better time to finally announce my long awaited, six months in the making cable car project that I call: Project: Cable car. This project is incredibly special to me for a…
Overview This project is a fully modular 3D printed tool box designed and explained step by step in a YouTube video series focused on mechanisms for 3D printing using Fusion 360 . The box is not just a static container. It includes…
This isn't one of my regular, complex, function or mechanical model, but rather just a way for me to kind of share what I've been doing at school. So in our school design class, we've recently been learning about CAD design and how to use…
this is a simple 4-speed gearbox designed for diy ,school ,and hobby projects
Here is a small project made during a rainy weekend. This is a flower pot specially designed to search for light in the kitchen . It is fully parametric : the height and diameter can be adjusted in Fusion 360 using parameters. In…
Code file in files along with instructions Print Settings Printer Brand: FlashForge Printer: Adventurer 5M Rafts: Doesn't Matter Supports: No Category: Gadgets
Dies ist eine Halterung für diese LED-Streifen . Sie ist beweglich und kann somit blendfrei eingestellt werden. Der Druckraum des „ PrintClosure Project “-Gehäuses ist sehr gut ausgeleuchtet. Die ca. 11 W/m starken LED-Streifen werden mit…
Um die LED-Beleuchtung des Gehäuses zu schalten, habe ich Montagematerial für diesen Schalter konstruiert. In die Seitenwand des Gehäuses werden Bohrungen mit einem Durchmesser von 26 mm und 3,5 mm angebracht. Das einfache Schutzgehäuse…
Diese Halterung wurde für das schwarze Netzteil des Prusa MK3 entwickelt. Damit kann es außerhalb des Druckergehäuses befestigt werden. Wie die neue Kabelführung aussehen sollte, lässt sich gut aus der mehrsprachigen Anleitung von Prusa…
Es handelt sich um eine geteilte Kabeldurchführung, die die Kabel vor Beschädigungen durch scharfe Kanten schützt. Ich nutze sie für das „ PrintClosure Project ”, um den Kabelstrang des Netzteils nach außen zu führen. Die Acrylglasplatten…
Im Rahmen des PrintClosure-Projekts , bei dem ein Druckergehäuse gebaut wurde, habe ich diesen Einbaurahmen entwickelt. In den Rahmen kann das digitale Thermometer-Hygrometer eingeklipst werden. Der Ausschnitt hat die Abmessungen 46,5 x…
Um diesen Lüfter und diesen HEPA-Filter im „ PrintClosure Project ” nutzen zu können, habe ich den Rahmen des „ Advanced Filtration Systems ” angepasst. Der HEPA-Filter wird über einen Bügel befestigt und ist mit Schaumstoffstreifen (5 x…
Yeah so its a sturdy frame to mount (imho the best budget) YG381 projector to the edge of a wooden bed frame to project video to your wall in front of your bed. I use mine to project Netflix, games and false windows from Youtube It has 7…
In a examination you have no time..... and you are nervous. This Stencel will a helpful tool to create a PSP-Project (project structure plan) in a examination.
Most of the cases and covers for the LRS200 were for DIN mounting, I needed one for benchtop projects so here it is. The terminal cover features a separate compartment with cover for the AC supply. The DC output compartment has a…
This model is designed for further integration to projects. The SH7789 320x240 display can be securely mounted and screwed with M2 screws. The front panel is just 0.4 mm thick to make the display best visible for a watcher. I unscrewed…
After printing the originals "unmeshed" the model and created a Heart Shaped tray, tested and works fine
I couldn't find a file for the XBJ 360 mini speaker from Tiktok so I decided to make my own one based off of the ones they are selling online. Prints in just over 2 hours, it is my first design I am sharing on makerworld but as you can…
[Overview] This is a teardrop-shaped lamp shade designed through a "Generative Design" approach using Blender Python . The complex, intersecting spiral geometry creates beautiful, intricate shadows on surrounding walls when lit. [Design…
The dart is in two parts that slide together. The pucks stack and five stacked fit the Pocket Catapult. When they hit their target, they go in all directions. The message capsule should be printed in two parts. None of the models should…
Project boards for Arduino's breadboards, Raises and tilts your project for easy access.
Ever since I bought my 3D printer, I've been planning to design a custom enclosure for this device. Until now, the wires were just a mess, constantly getting caught on things or coming loose, which caused reliability issues. I finally…
Bring a touch of 8-bit nostalgia to your next DIY project! This comprehensive kit features a complete set of letters and numbers inspired by the iconic NES-era pixel fonts. Designed specifically for 3D printing, these models are perfect…
A pair of ceiling mount clips (Left + Right) for the HEELLY mini projector and likely compatible with many rebadged variants of the same cheap Chinese projector sold under different brand names. If your projector has the same top panel…
4 font sets of the alphabet to give 104 letters for a 100th day of school project
Hinweis: Aus Sicherheits- und Haftungsgründen dürfen Arbeiten an 230/120-V-Netzspannungsanlagen (Niederspannung) grundsätzlich nur von qualifizierten Fachleuten ausgeführt werden. Note: For safety and liability reasons, work on 230/120 V…
A friends car had a bad conversion on his Nissan Skyline R33G GTST. I mocked up a new adapter plate to easily attach any projector lens. Multiple file types are attached so you can modify for the lens you got. I know china makes 1000+…
This is a simple accessory set designed for the HY300 Pro projector from Temu (marketed as: Native 720P resolution, supports 4K decoding ). What’s Included Remote Holder – keeps the remote in one fixed place so it doesn’t disappear.…
a model designed to fit over CDs to give more traction when making science Olympiad projects or just projects.
UPDATE: I'm mad. Absolutely mad... I made this: Disclaimer: this project was printed by JLC3DP at my own expense, no affiliation, but I do have to say; amazing service. I do however NOT recommend ;P Because then my keyboard is no longer…
"This is how you died." A stylized 3D miniature of the iconic Project Zomboid survivor. Armed with a reliable axe and a heavy backpack, this survivor is ready for the Knox Country apocalypse. The model is specially optimized for FDM…
Version 3 (03/22/2026) It's everyone's favorite Eridian! Based off of the blockbuster film Project Hail Mary adapted from the Andy Weir Novel. Print the quantity specified in the file name, the hands are your choice. Print with ASA or…
A unique 3D printable creation — this Large Electronics Project Enclosure, Customizable Cutouts, Screw Lid, Durable Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
A unique 3D printable creation — this Large Electronics Project Enclosure, Customizable Cutouts, Screw Lid, Durable Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
I use different premium sleeves than js500 and mine are just slightly longer. Specially, both Sleeve Kings Premium Euro Mini and Ultra Pro Euro Mini just barely didn't fit. So I resized both small card holders to fit my style sleeves.…
This project was made in my second semester in college. I made this before i even knew the tiny pod was a thing, i guess i wated too long to publish somethin like this. This takes inspiration in the iPod shuffle from back in the days.…
A Funko pop of myself. Created with creality CubeMe. Just a test, to see if it is cool. I will definitely try printing.
Tento hlavolam vznikl jako součást výuky zaměřené na seznámení žáků 1. stupně základní školy s 3D modelováním a 3D tiskem. Žáci pracovali ve skupinách a jejich úkolem bylo navrhnout vlastní hlavolam, který se skládá do čtvercové podložky…
Project EDINA is not merely a vehicle maquette. It is a moment of motion cast into permanence. An off-road icon reimagined as a ceremonial relic — where power no longer lies in speed, but in presence. Across its wide rally silhouette,…
just a clean lid as a remix
This is my project for a portable modular 10" server rack. The size of the rack is determined by the length of the rails. The rack is designed with 4 rails instead of just 2 to make the backplane configurable for those who need extra…
The project files for my custom GPU Shroud for use as reference. printable as one solid piece (needs 290mm+ printbed) or vertically as two parts. The file includes both variants. right click and split off whichever variant you want to…
