10in Home Server Project

I saw a bunch of 10in server racks when looking to get started with a HomeLab to tinker. Everything was built on an ender 3v2 so some parts have to print solo at an angle to accommodate the bed size. I used overture PLA 

The Lenovo thinkcenter shelf needed to be split to be printed so i included both files(solid and front panel separate for size constraints

everything else was design and print as I went, everything is really beefy on the design front so shelves don't sag at all(aka way over engineered and thicker than needed)

As with anything its a complete work in progress forever and i learned a lot on the way and will continue to tinker with it and allow it to grow 

please leave any feedback as its much appreciated 

The rails came from Penn Elcom Penn Elcom 6U Full Hole Rack Strip with Square Holes 2mm/0.08" R0863/2MM-06 PennElcomOnline.com

i used standard cang nuts for the front and then ran out so i made my own version and used machine screws for the back no. 8 x ½ that thread right into the mount

Some inspiration from Marius Bach thingiverse link 10 inch rack project by mariusbach - Thingiverse

Ethernet plugs from MajorOCD Ethernet Plug by MajorOCD | Download free STL model | Printables.com

Updates

12/10/22 - 

1. Added side fan mount for 120mm AC Infinity S3-P fan
2. Added Pi Shelf
3. Added Pi Shelf Keystone  
4. Added Back Panel with cable slots 
5. added more pictures of final product and during the build process

12/13/22- 

     1.Added .Step files for use in fusion 360 

2/1/23

1. Added Fan Mount (4x Noctua 40mm)
2. Added Air deflector ( total Prototype to push airflow up, Mounts on PDU with 2 sided tape) 

7/4/23

Uploaded a 5U rack rail for anyone who doesn't have rails available