Moana Heart of Te Fiti Locket and Heart Project
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Kids STILL into Moana, so time for a toy. This project is 2 prints, a hinged locket, and the rock that goes inside.
- Ocena
- 5 / 5
- Polubienia
- 123
- Pobrania
- 728
- Wydruki
- 2
- Wyświetlenia
- 3825
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This project contains two models. I designed both to print at 0.75mm extrusion width and 0.3mm layer height, which is my standard “high quality” setting for an 0.8mm nozzle on my Ender5 Pro. I printed them in 3DFuel's ProPLA at 230 on the nozzle and 60 on the bed. Includes photos show it right off the printer. I'll update with a final photo once it's painted.
The first is a print-in-place hinged locket/necklace that is designed to be robust but with styling of Moana's locket from the movie.
- The clamshell locket is designed with a print-in-place ball/detent hinge, as well as a small clasp.
- The model also has cutouts for 3mmx2mm disc magnets. You can superglue these in to add a stronger closing lid, but they're optional. The cutouts are modeled at 1/8" diameter, which is the perfect clearance for a little superglue or hot glue.
- For the string, I just drilled holes with a 1/8" drill bit, and didn't bother modeling the holes since they would have been in a vertical wall and probably would have needed clearing with a drill bit anyhow.
- The bottom inside of the model also has magnet cutouts that match the ones on the bottom of the next print
The next print is the Heart of Te Fiti.
- Simplified debossed design on top
- Flat bottom with magnet cutouts