Liczymy pasujące modele…
It works like the one in the Illusionist movie (no camera trick needed). The perfect romantic Maker gift. You can use it as a necklace or keychain, it fits 4 little pictures inside. This is one of the coolest things I have ever designed,…
This project contains two models. I designed both to print at 0.75mm extrusion width and 0.3mm layer height, which is my standard “high quality” setting for an 0.8mm nozzle on my Ender5 Pro. I printed them in 3DFuel's ProPLA at 230 on the…
Update 12.23 Version 2 Update ( fixed fused hinge error during slicing) --------------------------------------------------------------------------------------- What will you put in the secret compartment? The hinge and finger toggle are…
What is it? A print-in-place heart shaped locket made to be used as a gift. It is slim and fun as a light fidget (with the magnetic clasp!). Parts Required (other than printable parts) x2 round magnets 3x1mm (Affiliate link on AliExpress…
This necklace is made to resemble the heart locket from Undertale that both Chara and Asriel had, although sadly it cannot open. There are two locket models, one that is pixel like to match the game's style and one that has more detail…
Here's my entry for Valentine's Day 2023, yet another low poly heart thing that is absolutely not affiliated with Polly Pocket toys. Bring your loved ones to your bedside on any journey you undertake with the snap-fit frames that holds…
This is a Minecraft heart locket printed for Valentines day. Use your favorite hanging mechanism to attach an eye. My first versions used a tiny eyelet. I found that beading loops work very well. I used a 1.2mm drill bit to clean out and…
Introduction This is a locket which can hold two pictures which are created by toner transfer onto a 3D printed base. The pictures are fixed without using glue and can easily be swapped. Printing Instructions All the pieces can be printed…
Print in Place - Heart Table Top Locket
Clockwork Valentine Fidget Locket Make your loved one's heart spin this Valentine's Day! Working locket with spinning cog in the centre, working print-in-place hinge and removable insert. The spinning centre acts as a small fidget.…
My daughters asked me to print a medallion, in which they can store small pictures of their friends and family. The main challange was designing the hinge for the lids, but with the help of this instructable from Greg Zumwalt I managed…
A simplified replica of the Original Mystery Incorporated Locket from Scooby-Doo Mystery Incorporated.
Best Friends should have a locket to have and hold the image of each other. I introduce you to the Deadpool and wolverine best friends locket. Recommended to Resin print or FDM with smaller than standard nozzle for the hinges and pins to…
This will be a good bed-leveling test as well. I can bet you would not want to miss watching the beautiful pattern as it gets drawn in. Instagram : https://www.instagram.com/ivinnayayoesel/ Metatron's cube is made up of 13 circles that…
This heart-shaped keychain is inspired by Valentine's conversation heart candy. It prints with the text side down, without supports. Change the filament when the heart prints the frame around the photo insert. Use the PhotoTemplate to…
My school was staging a production of Anne, and the team needed a locket prop. I could not find a design that looked right, so I decided to create one myself. I wanted it to be multi-colour, but my AMS (Bambu’s multi-color system) broke,…
Print Settings(I use a flashforge Adventurer 3 pro): Lockette Box: 7 hrs This part must be printed on its side so that the hinge faces upwards and the heart hole faces sideways. The hinge requres a tolerance of 1mm or better. Make sure to…
simple print in place make sweet heart locket
This is a prop recreation of the Star Locket from Sailor Moon: https://sailormoon.fandom.com/wiki/Orgel . This is an enclosure that houses a Circuit Playground Bluefruit and Gizmo TFT. Adafruit Learn Guide:…
Unlock Your Love This Valentine's Day Give your special someone the key to your heart with this charming print-in-place heart-shaped locket. Personalized Touch Use the included 3mf files to embed your initials inside the locket for a…
I designed this as a gift for my SO, then figured it couldn't hurt to share, so here it is. All in all it is a very simple dovetail locket with what is supposed to be a retaining pin, just using 1.75 mm filament. Personally, to preserve…
For Valentine's Day or Mother's Day: A place for pictures of cherished people. The main part snaps together tightly and the heart shaped picture will remain in place without glue if it is properly sized. The decoration on the top has to…
This is designed to securely hold a micro:bit with a bit:buddy board. The bit:buddy is available here: https://www.lectrify.it/products/bitbuddy This can be a starting place for coding projects where students can explore different…
A simple brooch from Season 1's Sailor Moon. You'll need to source the Pumpkin Masters 'Xtreme Strobe' multicolored flashing LED light to fit inside the housing (or just make your own with 4 LEDs). This one cost about a couple bucks at a…
Deadpool vs Wolverine key chan
Make sure to add supports it will open and close.
Includes a key & stand. Requires multi-color printing (or painting) for the front plate.
Logo of Multigroove. The legendary organisation from Amsterdam (The Netherlands) created history by doing many mostly illegal house party's in locations like a tunnel under the highway and in large warehouses in and around Amsterdam. The…
Locket that has a backing on it to hook in between yarn in crochet or knitted items. It's a pretty tight fit depending on the yarn weight and how tightly crocheted/knitted the item is. I was able to finagle the locket into Bulky Yarn (6)…
Discover the power of positivity and prosperity with our Magic Locket of Fortune. Beautifully designed, this unique charm not only adds a touch of elegance to your style but also serves as a magnet for good fortune and success. Made from…
Heart-shaped pendant with photo space printed in place
A scalable design . Chain locket for DJs out there. No support required while printing.
A scalable design . Chain locket for DJs out there. No support required while printing.
it is a cool, no ams, heart locket. good every day of the year, not just valentines day.
This is a fun little print to carry a small keepsake with you wherever you go. Print it, tuck in a tiny note, a photo, or something meaningful, and gift it to someone special—or keep it for yourself! The locket consists of two parts that…
I hope you enjoy this print. I made a small locket with a rotating joint based on the old bionicles connection (Shown in the picture below). This was made for the Prusa Valentines contest. The printer needs to be well tuned. But just in…
This is a small box that can be used as a necklace or key ring. It's a fairly simple print, and does not require AMS or a multi-color printer, as long as you know how to manually change filament mid-print. I recommend printing the box and…
A 2-part heart shaped locket for holding images or other keepsakes.
it is a cool, no ams, heart locket. good every day of the year, not just valentines day.
A compact and cute bear-themed locket box, fully print-in-place with an integrated hinge. Perfect for storing small items like jewelry, pills, or tiny treasures. Important printing tips: Do NOT use PETG → hinge may fuse and fail. Use PLA…
Just a fun and cute accessory meant to be a keychain, or whatever you want it to be. Hope everyone enjoys the print. Layer height I set to 2mm on a 0.4 nozzle, Flashforge Adventurer 5M Pro, auto trees.
Playing around with print in place hinges in Shapr3D. Place a picture in the inner chamber.
this locket is from the show h2o with the names ingraved in it
I made this model at the request of one of my child. She wanted to have some pictures of her pets with her. The locket is designed to be compatible with the heart shaped lithophanes that can be created at lithophanemaker.com. (I have no…
This is a simple locket designed to work with Lectrify LEDs and battery holders. Both can be purchased at http://lectrify.it Direct links: Battery Holders: https://www.lectrify.it/products/battery LEDs:…
A cute heart key chain/locket that says Be Mine for valentine's day Print on fine settings I recommend PETG. I haven't used PLA, but it should work with somewhat flexible PLA Use some 1.75mm filament for the hinge Model may require…
