Locket (Medallion) with Toner Transfer Photos
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A locket which can hold two pictures, created with toner transfer onto a 3D printed base. Pictures are easily swapped.
- Ocena
- 5 / 5
- Polubienia
- 41
- Pobrania
- 305
- Wydruki
- 1
- Wyświetlenia
- 1075
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
Introduction
This is a locket which can hold two pictures which are created by toner transfer onto a 3D printed base. The pictures are fixed without using glue and can easily be swapped.
Printing Instructions
All the pieces can be printed without supports. You wiill need to print:
- 1x med_base_l.stl
- 1x med_base_r.stl
- 2x ring
- 2x picture (with toner transfer)
Use a layer height of 0.2mm or less. If you have never done a toner transfer 3d print, this article might be helpful: https://hackaday.com/2022/09/27/add-full-color-images-to-your-3d-prints-with-toner-transfer/
Assembly
- Put the pictures into the bases and fix them with one ring each.
- Put the two halves of the locket together and put a piece of filament (1.75mm) intothe hinge.
Final Words
If you have questions, remarks, suggestions, I would be happy to hear from you