Moana Heart of Te Fiti Locket and Heart Project
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Kids STILL into Moana, so time for a toy. This project is 2 prints, a hinged locket, and the rock that goes inside.
- Rating
- 5 / 5
- Likes
- 123
- Downloads
- 733
- Makes
- 2
- Views
- 3,846
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This project contains two models. I designed both to print at 0.75mm extrusion width and 0.3mm layer height, which is my standard “high quality” setting for an 0.8mm nozzle on my Ender5 Pro. I printed them in 3DFuel's ProPLA at 230 on the nozzle and 60 on the bed. Includes photos show it right off the printer. I'll update with a final photo once it's painted.
The first is a print-in-place hinged locket/necklace that is designed to be robust but with styling of Moana's locket from the movie.
- The clamshell locket is designed with a print-in-place ball/detent hinge, as well as a small clasp.
- The model also has cutouts for 3mmx2mm disc magnets. You can superglue these in to add a stronger closing lid, but they're optional. The cutouts are modeled at 1/8" diameter, which is the perfect clearance for a little superglue or hot glue.
- For the string, I just drilled holes with a 1/8" drill bit, and didn't bother modeling the holes since they would have been in a vertical wall and probably would have needed clearing with a drill bit anyhow.
- The bottom inside of the model also has magnet cutouts that match the ones on the bottom of the next print
The next print is the Heart of Te Fiti.
- Simplified debossed design on top
- Flat bottom with magnet cutouts