The BEST knitting loom! Adjustable for any size yarn or project!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A linkable scalable knitting loom that I designed to be printed with FDM without supports.
- Ocena
- 5 / 5
- Polubienia
- 708
- Pobrania
- 969
- Wydruki
- 7
- Wyświetlenia
- 15 250
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
Last year I designed a linkable knitting loom system that would allow users to add/remove links as they work for increases and decreases. This is FAR more usable than the standard round loom because you can easily modify stitch count and its a bit more portable because it can be folded.
This year I made some minor adjustments that should allow for easier linking and minimizing flex when using smaller weight yarns.
since all printers have different tolerances, I would print 3 or 4 of these to test the fitment with your machine adjust scale of model as needed. I would also print these with NO LESS than 3 walls otherwise you may have pins breaking off while you knit.
PLA or PETG work well. I havent tested any other filament types. My personal favorite is matte PLA.
| Size | Gauge | Needle size | Yarn weight |
| Fine | 1/4" (6.4 mm) | 2 (2.75 mm) | 2 |
| Small | 3/8" (9.5 mm) | 5 (3.75 mm) | 3-4 |
| Regular 7/16 | 7/16" (11.1 mm) | 7 (4.5 mm) | 4-5 |
| Regular 1/2 | 1/2" (12.75 mm) | 8 (5 mm) | 4-5 |
| Large | 5/8" (15.8 mm) | 10.5 (6.5 mm) | 5-6 |
| Extra Large | 3/4" (19 mm) | 11 (8 mm) | 6 |
I originally designed an integrated counter link, but I would recommend you check out John T's phenomenal remix of my counter design!