1 / 1
M12 3453 impact driver 3 bit holder R 6mm Magnets REMIX — zdjęcie 1

M12 3453 impact driver 3 bit holder R 6mm Magnets REMIX

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Moved the holes back from the hex slots, thickened the body a bit to support pan head screws.

Ocena
5 / 5
Polubienia
5
Pobrania
82
Wydruki
1
Wyświetlenia
324
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Moved the holes back from the hex slots, thickened the body a bit to support pan head screws. The original (left) created holes, I moved the magnet holes 1mm from the hexagonal area to create solid walls. I also changed the screw head to pan instead of machine. Modified in Tinkercad, the inner wall is janky looking but prints fine.

No supports needed, print vertically as shown below.

Printed in PETG 0.2mm layers, 30% grid fill, no supports or brim.

Tagi