1 / 1
M12 3453 impact driver 3 bit holder R 6mm Magnets REMIX
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Moved the holes back from the hex slots, thickened the body a bit to support pan head screws.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 82
- Makes
- 1
- Views
- 324
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Moved the holes back from the hex slots, thickened the body a bit to support pan head screws. The original (left) created holes, I moved the magnet holes 1mm from the hexagonal area to create solid walls. I also changed the screw head to pan instead of machine. Modified in Tinkercad, the inner wall is janky looking but prints fine.
No supports needed, print vertically as shown below.

Printed in PETG 0.2mm layers, 30% grid fill, no supports or brim.
