1 / 1
Elegoo Neptune 4 Pro Nozzle Wiper Bambulab Style — zdjęcie 1

Elegoo Neptune 4 Pro Nozzle Wiper Bambulab Style

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Remix from Tom for the Silicon wiper from Bambulab

Ocena
0 / 5
Polubienia
17
Pobrania
83
Wydruki
0
Wyświetlenia
1028
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

A new Noozle Wiper for your Elegoo Neptune 4/Pro

 

First Measure your PEI Sheet and your Build plate you need an avg 5,25-5.35 mm thickness for Correct work other vise you need a little bit of tape for the tolerance.

Change in printer.cfg your Stepper X 

position_min: -7.0

and your Stepper Z 

position_min: -5

Put the Gcode in your cfg File, in your printer.cfg or in your macro folder.

 

Add the following line to your Start-Macro after heating the bed and before bed leveling: 

CLEAN_NOZZLE EXTRUDER_TEMP={params.EXTRUDER_TEMP|default(200)|float} WIPES={10}. (Parameter WIPES: Number of cleaning movements (default = 10). Cleaning temperature = Extrusion temperature - 40°C.)

Optional: Add the following polygon under Printer Settings -> Excluded Print Bed Area in the Orca Slicer: 0x0,25x0,25x5,5x5,5x42,0x42.

Tagi