Elegoo Neptune 4 Pro Nozzle Wiper Bambulab Style
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Remix from Tom for the Silicon wiper from Bambulab
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 83
- Makes
- 0
- Views
- 1,028
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
A new Noozle Wiper for your Elegoo Neptune 4/Pro
First Measure your PEI Sheet and your Build plate you need an avg 5,25-5.35 mm thickness for Correct work other vise you need a little bit of tape for the tolerance.
Change in printer.cfg your Stepper X
position_min: -7.0
and your Stepper Z
position_min: -5
Put the Gcode in your cfg File, in your printer.cfg or in your macro folder.
Add the following line to your Start-Macro after heating the bed and before bed leveling:
CLEAN_NOZZLE EXTRUDER_TEMP={params.EXTRUDER_TEMP|default(200)|float} WIPES={10}. (Parameter WIPES: Number of cleaning movements (default = 10). Cleaning temperature = Extrusion temperature - 40°C.)
Optional: Add the following polygon under Printer Settings -> Excluded Print Bed Area in the Orca Slicer: 0x0,25x0,25x5,5x5,5x42,0x42.
