Creality Digital Spool to Bambu X1/P1 Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This will allow you to use the current spool mount holes for the Creality Digital Spool/Scale
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 377
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
There were a number of models that provided side mounts but I couldn't find one that allowed one to use the same space as the original Bambu spool mount and also use the Creality Digital Spool Scale. This seems like it should be something that Creality would have on their website.
There are two versions. A flat version and round version. There is no advantage to either, its purely personal preference.
I've tested this with PLA, PLA-CF, PETG and PC. The only recommendation is that you increase the wall loop to 6 for strength.
[u]Requirements[/u]:
The screws will have to be a little bit longer. They are M3x12mm Screws.