Liczymy pasujące modele…
Double-sided curved switching track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
Wydruk około 2,56 €–3,13 € nettoWstępna wycena jednego wariantu
I was researching for a mount hand which can handle HyperX SoloCast Mic and found this attractive tablet/phone holder. Adapter which I create is not required any additional screws and nuts. You just replace part. Print instructions:…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
Purely mechanically controlled filament winder for Bambu Lab P1, X1, X1C or X1CC 3D Printer. Printed on Bambu Lab X1 CC. Watch the videos first at the bottom, at the end of the description. If there is news about the model, you will find…
I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…
THIS IS THE FIXED VERSION Hello everyone, I’m P1lotz , a professional 3D artist from Scandinavia, and I have been working in this field since 2019. This is my first articulated print ever. I really hope you like it. More models like this…
My BambuLab X1CC is in the silent cabinet and I have been thinking for a long time about how I can most comfortably collect the filament poop residues ? I found a beautiful slide (thank you - erickson85!for sharing of your cool model!)…
Buy the Full Vision kit I've teamed up with VOXELPLA to make a kit that includes acrylic panels, printed parts, screws, and tool. The magnets and threaded inserts are pre-installed, so you won't need anything outside of the kit. Shipping…
Update (5/3/23): I would now recommend that people consider trying the ShortStack Remix linked in the 4/17/23 update directly below if it meets your needs. Its been used for a few weeks with decent success, and seems mostly equivalent to…
Update 27/12/2022. I've made some amendments to the assembly guide PDF. Added some additional notes on the best way to print some of the parts as well as provided further detail to some sections of the installation process. I've also…
UPDATE 8 Apr2024 I believe in working with local small businesses when selecting regional vendors. Unlike established companies that are good at managing logistics and sales, small businesses or new start-ups are still learning the ropes,…
This is a 20° bracket that guides the ptfe tube of the P1P to run the same as X1/C. This can be used standalone and as part of the Arc for the P1P. The holes for M3 are meant to be self-threaded so I do not need to use an insert. The hole…
Turn your Bambu Labs P1P 3d printer into a Borg Cube with this MOD. 16/04/2023 - Please note assembly instructions have been amended. Please read thoroughly. This design has been uploaded in two parts due to licenses. The parts under Part…
This is yet-another-calibration tower, with several tests for overhang/bridge performance, but also other tiny features that I think represent common use cases in detailed 3D printing. One of the things the Bambu X1/X1C/P1P printers…
UPDATES: April 7th: Added support for 24V 4020 fans on V2 design (should also work for V1 designs). If using 24V fans, trim the boost converter output to 24.0 instead of 12.0 April 7th : Added “w ireless test jig” to help with assembled…
Side Filemant Guide for the P1P if you use a Side Mounted Spool Arm / Holder It is designed to screw directly into the left upper frame of the printer, for extra stability and in the back of the frame, where it replaces the original PTFE…
These are not go over guards and replace the stock removable cage! (See Pics) They are tested in my own reef tank! They provide a cleaner look then a go over guard and the added safety of one! No more daily cleaning of quick to clog foam…
UPDATE 19 Feb 2023: A new toolhead cable is required when using the X1 cable chain. It will be available at the Bambu Lab store soon. (will update when it's available) When you install this bracket will only require the cable chain and…
End cap for on top of the Z-Axis of the Bambu Lab P1P and X1(C). Printed in ABS on textured PEI plate in high resolution. The caps are slightly smaller then the hole of the z-axis so they can easily be removed or move/rotate. ABS is used…
Basic primitive hoop edited for embroidering socks on the brother skitch pp1 embroidery machine Hardware: 8x 10x2mm round magnets
I got tired of watching the Amazon cablechain drops lower and lower just before it hits the carbon rods. So I thought about how to prevent that. The solution is to change the angle at which the cablechain is mounted on both sides. In this…
Thanks for downloading in advance and please don't forget to like this modell!
I reworked Martins model of the screen riser to create a Parallel version to satisfy the OCD in all of us. Unlike the original you may require supports as the angle creates much larger overhangs. Updated to add a flat spot level with the…
See Text file for settings, orcaslicer profile in the .zip. To add go to file-Import-Import Configs and it should add it in. It will only show under bambu p1s 0.4mm nozzle size To avoid confusion. the filament will be added under the…
Simple and easy P1P/S Panda Touch Display Holder. This piece easily slides onto the original display, allowing the Panda Touch to sit next to it. Featuring two attachment points, it conveniently secures the USB cable, providing a neat…
Case for FNIRSI LCR-P1
Remix of the transmitter box from Shaladdin's awesome Wireless powered BentoBox (remixed from thrutheframe's BentoBox Air Purifier for X1C). My version of the X1 Carbon (received April '23) has an extended edge which prevents installation…
I wanted to have a mix from the Pegboard and the Option to add a little "Design". In my Case it should be the good old Mario. But that is only my childhood Hero - you can print Pixels for any graphic that fits on the pegboard 😁 I…
This is a plain lid riser for the Bambu X1C and P1S. I don't care for how the ptfe tube rubs (and wears down) against the glass in my X1C and wanted to give it some more space to move. There are other risers that include vents or slots…
A slip on shroud to be used with the parallel screen adjuster . V2 is required to be compatible with this shroud.
2x3x5 Gridfinity container for X1C and P1S nozzles. By default it contains a section for each nozzle (0.2, 0.4, 0.6, 0.8) and a slot for a suitible hex key (the one included with the printer does not fit without making it 2x4) There are…
My model was printed in Extrudr GreenTec Pro Carbon. You can use whatever you feel is good. I used 20% infill. Must be printed: 1x Front Left 1x Front Right 1x Back Left 1x Back Right 4x Connectors" The connectors were attached with glue.…
When I got my KLP1 there were some problems by design. One Problem was the lower belt on the right rear side. The idler pulley is mounted too far to the left, resulting in a non-parallel belt path, resulting in different belt tension…
The main body of the winder coil holder is divided into 6 parts, all parts are printed lying down without supports. I printed with a nozzle of 0.4 with a line width of 0.6 and a thickness of 0.3. After printing, cut the holes.
There was a notable change where the design of the Bento Box Receiver Box no longer fit into the "L" slot in the bottom in the a refresh of the Bambu Lab X1C. Additionally the underside of the machine also changed, which necessitated a…
I designed this smart sensor holder so you can mount the Aqara FP2 mm presence sensor into the wall corner, or, if you would like, all the way at the upper room corner easily, with space to feed the usb cord into the mount while…
simple screen cover for bambulab p1s
full files: https://www.etsy.com/listing/1673445145/zs-o1-endgame-gear-op1-inspired-3d assembly instructions for full mouse: https://docs.google.com/document/d/1CEqZDQMqfhigdJQ8UTBbVbg6YFxBtL2ifgjq7VNZr4E/edit twitter:…
I improved the original model with this mods: LED GASKET WINGS , so the LEDs can't shine into the eyes if you watching inside the chamber 45° LED gasket 12mm LED gasket LOWER LESS MATERIAL FASTER TO PRINT CAM OR GoPro SIDE MOUNT NO SIDE…
Sept 2023 Update: Improved Design Now Available Here: https://www.printables.com/model/586801-improved-replacement-drip-tray-for-the-grp1060b-4- Somehow lost the drip tray/catch pan for my 4-serving George Foreman Grill (GRP1060B).…
20230216 Ver.2 Update: 1. remodel the overall appearance 2. add more directions of magnet 3. hygrometer will have one more install direction BOM： 1. glue (or change the XY hole if needed) 2. 6*3X10 magnets Print： PETG 0.2 20% infill…
Airsoft conversion kit for cyma 122 aep Almost finished. I will do some photos and conversion will be complete!!! Main goals of this project Make space for bigger battery and AEG size mosfet Turn pistol in to submachine gun Features of…
Servohalter SG90 mit Clickdeckel. Seht euch auch Typ2 und Typ3 an.
8-18 Update the heat dissipation fan bracket to magnetic fixing, provide 2 4010 fans or 4 2507 fan brackets. 1、The top side has a cooling fan and uses 2 4010 cooling fans 2、The top side does not use the cooling fan, and directly prints 2…
Used to increase the height of p1p top window
Pen plotter for Kingroon KLP1 New 2025 W.I.P. Pen plotter for klp1 210 https://www.printables.com/model/1354295-klp1-210-pen-plotter-revamped-wip Can fit any printer with 3010 fan close to the extruder! Tutorial inside the zip file!
I liked having the screen mounted perallel as my printer screen is located at eye level when I am sitting down. Due to that modification, The Xtouch mounts by Teaching tech would not it. This remix fixes that. I used M3x16 screws all…
one piece mounting for both RX and antenna
The belt of the KLP1 has a lot of non-parallelism, and this design tries to solve the problem by shifting the position of the synchronizer wheel next to the right motor. The strength of the print may not be sufficient, please do not…
For use with Fiskars Pruning Shears (P121) . May fit others, but I have not tested any. I left the back of this model empty & clear to allow you to use your preferred mounting method. I am using this holder with a Gladiator…
This is a remix of emcee1111's transmitter box to support this USB-C based charging coil: https://www.amazon.com/dp/B09FLCMGV9 . The original charging coil listed for the Wireless Bento Box doesn't appear to work well with 24v fans. Based…
Designed for AMS printing. Project file included for Bambu Studio.
UPDATE 2025-06-07: I noticed that some filament spools (Overture, etc.) have an open and ribbed ring around the center hole. I added a spacer that has two touch points to accommodate these types of spools. This is a very simple, quick…
Tiny Trainer V2 - RX mount for EP1 or similar To be printed in TPU. Fits to the frame at the front between the camera and stack. Category: R/C Vehicles
Printing Instructions (PLA): Main Housing: 30% infill, enable supports (minimal/touching buildplate only). Other Parts: 15% infill, no supports . Layer Height: 0.2mm (recommended). Wall Count: 3 (recommended). Fan Specifications: Size:…
I needed some way of extracting the smelly ASA fumes out of my garage. This channels the air from the AUX fan to the outside. There are no additional extraction fans. UPDATE: I added A Y joint to attach another extractor pipe. This one…
CLICK HERE TO DOWNLOAD LATEST RELEASE FROM MY GITHUB The purge line from the A1 has been spliced into the P1S start GCode. The purge line changes location so it is (almost) always placed beside the print, and is much smaller than the…
A simple mount for a switch to turn your Bento Mini ( https://www.printables.com/de/model/517219-bento-mini-for-bambu-lab-x1c-p1p-and-voron-v02 ) on and off. BOM: Printed part switch ( I used…
P1P-P1S only, this hepa holder is a bit taller than the regular one, risking potential collisions with the micro lidar on X1 models. not tested though, just a hunch. Since the bento box is meant to suck air in from the top and expell from…
This is a model i have made because i every now and then experience that my X1 series printers when wiping form color change or just of startup the poop is getting splashed/knoked into the chamber and sometimes on the bed. I have printed…
A light cone for a Ledlenser P14 flashlight. You can use it as a diffuser or to direct vehicles (marshaller). Due to the opening at the tip you can also illuminate smaller objekts at close range or read a note. There is also a version…
First off: I do NOT advise trying this unless A) you are fairly mechanically inclined/crafty, and B) are ok with potentially boat anchoring your shiny fresh new U1 with no parts availability yet lol parts are available now but still…
The makerspace that I volunteer at got some Bambu Lab P1P printers awhile ago. I made this model to celebrate our new printers.
Hello, I installed an Xdure LED headlight mask on my 2006 KTM LC4 640. To keep the original digital speedometer, I needed an adapter. This adapter now allows the mask to be mounted without making any modifications to the motorcycle itself…
I have a NAS server with the Antec P101 Silent Case. When the side panel clip broke I made this one to raplace it and figured, why not share with others that may be searching for this too.
The switch clips in on the inside of the front right corner. Print with normal support and orientation like in the picture. I used these switches: https://www.amazon.de/dp/B07MW92CW8?psc=1
I cut off the original's curved sides (using the CG modeler Lightwave 2015) so it could be rotated and printed flat, and removed a big chunk from the middle to save plastic and make it print fast. Very little support is needed for this…
This print is made for mounting a Raspberry Pi Zero or Zero2W case with zip ties in the rear of a Bambu Lab X1, P1P, P1S. Tested with print from this link, but will probably work with a lot of other Pi cases :-)…
With this model, you can test the printing accuracy and adhesion to the plate. If you want to get the best results, you can clean the plates so that they adhere well. The test can be printed with any material. I used it with Lithophane…
I am uploading a simple model, fully printed BambuLab P1S/P1P. This model does not contain electronics, so it is perfect for people who do not like to tinker. As you can see in the photo, there are not many elements to print. The assembly…
Easy and convenient power input for the bambulabs P1S (or other compatible machines). This allows you to externally power devices such as a bento box without any permanent non removable modifications to the machine! You will need some…
Extends the flashlights body to reduce risk of miss pressing of on/off button. Button is visible and functional over wall for ease of use. It doesn't protect button fully but decrase chance that button is pressed without intension.…
This door handle is for convenience and looks. It only takes a hour to print. And looks cool. The head was made using my Dogs picture and Powered by Make My Statue from MakerWorld (https://makerworld.com/makerlab/makeMyStatue)
This is a very simple case for an ESPHome DNSK-P11 replacement module. The module can be ordered from https://www.espthings.io/index.php/2021/08/03/panasonic-climate-wifi-interface-for-esphome-and-home-assistant/ While a custom case isn't…
This is a simple mount for temperatur&humidity sensor. You can use this sensor with Tuya mobile app too. Link to sensor: https://pl.aliexpress.com/item/1005005193544757.html Category: 3D Printer Accessories
This is a case designed for the SmallRig P96 video LED light and includes a compartment for storing the type C charging cable. Also includes a recessed area inside to accommodate the stepless knob.
Problem: Airtag inside the Carbon frame did not work that well because of Mr. Faraday. There are some other good places to put one such as under the saddle or integrated inside a water bottle holder. If I were a thief though those are…
Printed in PETG. Use the same screws.
Bambu Lab P1P/P1S parallel screen base with locking mechanism Same locking mechanism as the Bambu You may need to trim the locking teeth, depending on your printer Compatible with original Shroud
I like customizing my printers and so my P1S needed some changes as well. I designed and printed a few new handles for the AMS and printer.
This is a holder for the Elegoo Air Filter (Air Purifier). It is designed to be mounted in the bottom left hand and/or right hand corner of a P1S. This is used to filter out odors from various filaments. The P1S has a chamber fan/filter…
This is a minimalistic adapter thing to flash those sp111 with little effort. I mean yes I had to soldered a bit at the pogo pins but this was much simpler than trying to get the PCB out or solder in the housing. An advantage here is that…
Dieses Projekt beinhaltet das Modell für die Originale Kundenschnittstellenabdeckung (P1) vom Sagemcom T210-D Smartmeter genauso wie eine Integrierte Halterung für einen ESP32 c3 mini (nachträglich umgebaut) M-Bus auf UART Converter…
P1P Pegboard holder, to be used in conjunction with the P1P printer and pegboard shell. It will require supports to print; however, it is an easy print to execute.
this is a mount for a 9x13.3mm switch to mount where there is the hole on top
A hinged mounting bracket for 2 https://everythingsmarthome.github.io/everything-presence-one/ EP1's presence sensor Category: Electronics
Ein Halter für den Zylinder in der AP1 2024 der Mechatroniker Prüfung.
Jeremy and Garth of Jaded Parts came up with a great idea for a snap-on two finger (or three!) trigger attachment for the Professor Motor controller. I like their design much better than my own two finger trigger for that controller,…
To print and use: Follow @suit's original printing and assembly instructions . (Print flat on bed, in PETG). Mount the front MC4-M6 connector and PTFE guide. Print and assemble a y-splitter of your choice. The one pictured is the splitter…
Was looking for a useful way to mount a working light on the P1S. Planning to print the side spool holder , I saw a nice opportunity to add it there. Maybe it's also helpful for anyone else. Had a clamp gooseneck lamp ( Amazon.de ) in use…
3D printable ACA P10 more is coming soon hope you like it.
I cut off the original's curved sides (using the CG modeler Lightwave 2015) so it could be rotated and printed flat, and removed a big chunk from the middle to save plastic and make it print fast. Very little support is needed for this…
Big magazines for a big gun. These are made for the Big Greg and M4M0TH GREG blasters. There are two options, a 9 round mag, which is the highest capacity you can print on a 256x256x250mm print volume. It prints horizontally, diagonal…
Dieses Projekt beinhaltet das Modell für die Originale Kundenschnittstellenabdeckung (P1) vom Sagemcom T210-D Smartmeter genauso wie eine Integrierte Halterung für einen ESP32 c3 mini (nachträglich umgebaut) M-Bus auf UART Converter…
With High Flow Nozzles (CHT) and when printing with PLA and due to the improved heating of the micro swiss hotend you have to adjust the print settings / print temperature and take care of retraction settings etc. because it is really…
Handguard for the Novritsch SSP18 featuring M-LOK slots and a full-length Picatinny top rail. Uses M3*30 Screws and M3 Nuts. Includes Inlay for the Picatinny rails to reduce wobble 3D printed in PLA with 0.2 mm layer height, 0.4 mm line…
It uses 3 parts the left, the middle and the right part, if you want to use it for more than 2 nozzles print the middle part as often as needed for your nozzles. -You won't need any supports for the print
This is a simple leg for HATRON HCP130 laptop cooling pad. i think you can use this for other brands that exactly are same with HCP130 the difference is just brand names.
Spool holder for Bambu Lab P1P. Fits up to 4 spools onto 1 P1P. Clips onto top “rails” and slides with a notch into the corner holes so that it doesn't move around. Beaware the different models, the notch is in different positions, so…
What does it do? This model allows you to clip the Airthings Wave Plus to the top of the printer, that clips in the small ridge by the top glass. Why did I make it? I wanted an easy way I could measure the amount of VOCs coming out of the…
![[updated 0216] Mijia(xiaomi) hygrometer Magnetic holder for bambulab X1/P1p/etc](https://media.printables.com/media/prints/372977/images/3334232_5fcc4f89-5016-4850-a3c8-5c499cae3146/ishot_2023-02-16_172115.jpg)
