Bambu Lab P1P full printable enclosure mod (P1X)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Please read the Description. This is a P1P Mod for a printable enclosure. I used the official BambuLab side panels.
- Ocena
- 5 / 5
- Polubienia
- 235
- Pobrania
- 1816
- Wydruki
- 2
- Wyświetlenia
- 27 951
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is probably the first fully printable case mod for the P1P (maybe).
Important Update: 23.01.2023.
Printing these Files is complicated. ABS/ASA/PETG all failed because of Warping, the parts are to thin and large. Even with my X1C i had no success. PLA is not a reliable Material because of the temps inside the enclosure. I don't think this project will work out. You can use the Remix made by Hobo4ssassin for the Side panles (Hinges for the door missing).
https://www.printables.com/model/365821-p1p-enclosed-sides-armor-modplate
But I cannot guarantee success if you start this project. Consider it as BETA.
- Print in ABS/ASA (Because of temps inside the enclosure)
- Infill 15-20% (Bolts for the door 100%)
- Supports
| Part | Fix | Date |
| Door bolt | Reduced door bolt size 0,1mm | 13.12.2022 |
| Added ptfe tube bracket | made by @thrutheframe | 19.12.2022 |
| P1P_SidePanelLeft_SidePanelLeftTopV1.1 | Uploaded correct file. Fixed size for backplate | 04.01.2023 |
| P1P_SidePanelRight_R_SidePanelRightTopV1.1 | Fixed size for backplate | 04.01.2023 |
| P1P_BackPlateV1.1 | fixed size and thickness | 04.01.2023 |
Complete Rework
| Part | Fix | Date |
| Right Side Panels | Complete Rework | 09.01.2023 |
| Left Side Panels | Complete Rework | 09.01.2023 |
| Door | Complete Rework | 09.01.2023 |
| Back Panel | Complete Rework | 09.01.2023 |
| Added STEP File | 09.01.2023 | |
| Left Middle Top Panel | Fixed Srew insert position thx @Hobo4ssassin | 10.01.2023 |
| L & R Middle | 0,5mm longer each | 24.01.2023 |
| Folder | Backplate & LR_BackSideCorner + 5mm longer | 28.01.2023 |