Bambu Lab P1P full printable enclosure mod (P1X)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Please read the Description. This is a P1P Mod for a printable enclosure. I used the official BambuLab side panels.
- Rating
- 5 / 5
- Likes
- 235
- Downloads
- 1,816
- Makes
- 2
- Views
- 27,951
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is probably the first fully printable case mod for the P1P (maybe).
Important Update: 23.01.2023.
Printing these Files is complicated. ABS/ASA/PETG all failed because of Warping, the parts are to thin and large. Even with my X1C i had no success. PLA is not a reliable Material because of the temps inside the enclosure. I don't think this project will work out. You can use the Remix made by Hobo4ssassin for the Side panles (Hinges for the door missing).
https://www.printables.com/model/365821-p1p-enclosed-sides-armor-modplate
But I cannot guarantee success if you start this project. Consider it as BETA.
- Print in ABS/ASA (Because of temps inside the enclosure)
- Infill 15-20% (Bolts for the door 100%)
- Supports
| Part | Fix | Date |
| Door bolt | Reduced door bolt size 0,1mm | 13.12.2022 |
| Added ptfe tube bracket | made by @thrutheframe | 19.12.2022 |
| P1P_SidePanelLeft_SidePanelLeftTopV1.1 | Uploaded correct file. Fixed size for backplate | 04.01.2023 |
| P1P_SidePanelRight_R_SidePanelRightTopV1.1 | Fixed size for backplate | 04.01.2023 |
| P1P_BackPlateV1.1 | fixed size and thickness | 04.01.2023 |
Complete Rework
| Part | Fix | Date |
| Right Side Panels | Complete Rework | 09.01.2023 |
| Left Side Panels | Complete Rework | 09.01.2023 |
| Door | Complete Rework | 09.01.2023 |
| Back Panel | Complete Rework | 09.01.2023 |
| Added STEP File | 09.01.2023 | |
| Left Middle Top Panel | Fixed Srew insert position thx @Hobo4ssassin | 10.01.2023 |
| L & R Middle | 0,5mm longer each | 24.01.2023 |
| Folder | Backplate & LR_BackSideCorner + 5mm longer | 28.01.2023 |