1 / 3
Bambu Lab - MAGNETIC Purge/Flush/Poop bucket for X1 and P1 Series - Fullsize and Slim Version | UPDATE 2023.05.13 — zdjęcie 1
1 / 3

Bambu Lab - MAGNETIC Purge/Flush/Poop bucket for X1 and P1 Series - Fullsize and Slim Version | UPDATE 2023.05.13

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bucket with cutouts for magnets to keep it close to your BambuLab's printer. There's also a slim version available.

Ocena
4,914 / 5
Polubienia
722
Pobrania
7233
Wydruki
100
Wyświetlenia
25 674
Oceny
81

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

My Bambu X1C vibrates quite a lot which means sometimes the bucket is being pushed away. When that happens I find filament everywhere on the table. That's the reason why I made this Remix.

If you already printed a bucket without cutouts for magnets, look here.

Because I just couldn't figure out how to mofify a imported .stl I made the files from scratch with Fusion360 by measuring my already printed poop bucket.

 

----------------------------------------------------------------------------------------------------------------

If you want to help me out a bit and see some stuff I made, work in progress, or models before they will be here consider liking and following my Facebook page, thank you very much - it means a lot to me! :)
If I link something on Amazon, those are affiliate links. Doesn't cost you anything but helps me grab a cup of coffee from time to time - thank you! :)

----------------------------------------------------------------------------------------------------------------

I included a few different magnet sizes, if you need any others just comment them here or shoot me a message.

 

  • Print with:

    • PLA

    • 3 wall loops

    • 15% infill

    • no supports are needed

    • no brim needed

 

  • Additional stuff:

    • Just glue in your magnets into the cutouts.

 

  • Parts:

    • BambuLab_Bucket_Magnets_d%x%mm

      • Check each seperate description for sizes of cutouts.

      • It needs around 350g filament

    • BambuLab_Bucket_Magnets_Slim_d%x%mm

      • Check each seperate description for sizes of cutouts.

      • Depth is 110mm, should be able to better fit in small spaces behind your printers.

      • It needs around 260g filament
         

 

  • Magnets:

    • I have a bunch of those d5x1mm magnets. Depending on the size of the hole i just put the necessary amount in, that ways the magnets are usable more flexible.

    • Here are some d6x3 magnets.

    • Here are some d5x5 magnets.

 

  • Updates:

    • 2023.02.12

      • Loosened tolerances for magnet cutouts

    • 2023.05.13

      • Moved cutouts one cm to the left. They should be on the metal now

      • Moved Old Files in a new folder

    • 2023.09.16

      • Added more variants

----------------------------------------------------------------------------------------------------------------

I'm looking forward to your comments and makes. :)

Tagi