Liczymy pasujące modele…
Water Bottle Car Cup Holder Adapter designed for Camelbak Chute 32 oz. Will fit water bottles up to 9.5 cm in diameter (ideally larger than 8.75 cm). Print with support for overhangs or slice into 2 pieces to attach with screws. Planning…
Didn't see anyone with a poop chute that went around the Qidi Plus 4 yet. So I decided to slap one together. By no means is this one the best design, but maybe it's a good start for someone to remix? It's not perfect and there are…
I made a little platform for my set up since my printer sits right at the edge of the shelf. Double sided taped it to the shelf since the magnets couldn't hold it in place. Made for this chute…
I made a little platform for my set up since my printer sits right at the edge of the shelf. Double sided taped it to the shelf since the magnets couldn't hold it in place.
Philips LatteGo Chute Extender Funnel The wife loves to drink her decaffeinated coffee in the afternoon and would ALWAYS spill some coffee grounds around the chute. This extender funnel aims to solve that.
2 magnets (max dimension: 15x8mm) are needed to attach it to the back. (I used 15x5mm). This makes it easy to empty the container. Magnet cower should fit snugly. The container has the necessary distance from the wall so that it does not…
This is a rear Purge shoot and rear deflector for the K1 Max. This shoot needs modifying of the rear panel in order to use it. I used a 30MM Hole saw to drill the hole where the filament spool goes on the original Panel, Once I drilled…
Snap in place - Removable poop chute for the Elegoo Centauri Carbon. Poop chute which snaps in place with magnets. The poop chute “floats” and is connected to the printer, which comes in handy with the anti-vibration feet installed. No…
I wanted to build a poop container for my Centauri but didn't like the idea of having to rebuild something else once the ams came out for it. Since I already had one of the “(The original) Bambu lab segmented poop chute pipe” models on my…
Can make out of any filament. To clear the poop, you must remove the entire chute. To do this, simply lift up and pull away. 41048.38896 mm³ No supports needed if you choose that file
The waste chute is extra long for a waste bin on the left side of the printer. It was designed to be easily installed and removed without needing to fully unscrew it. I have my printer against a wall and the chute going behind a desk, so…
Been working on this for a while on and off, pretty much has been working great for my setup. I had to change the files some to work for the standard bed layout for the 350mm 2.4 since my bed sits lower. Its also made for a 355mm and can…
ENG - A basket and slide to capture the excrement of Flashforge 3D printer filaments. It is quite narrow and equipped with a removable basket, so the printer can be moved against a wall. The slide has been designed with grills to remove…
This is a full replacement for the stock chute on the Eureka Mignon Specialita. It's a little wider and is less prone to clogging. It also has a built in funnel. There are two versions. One for use with a tilted base (single dosing) and…
Rokenbok Half Size Straight Chute Door has been separated for better printing. I got the best results printing the chute standing up (shown in the photo). Model has been improved and updated to v2, I still have some more tweaks to make…
Updated: Added shorter poop bin for X1C with out the riser. Trim the poop slide to give it more range of motion. Remove poop slide adjustable support. Trim the right main unit to add more room for poop slide. THIS ONLY WORKS IF YOUR AMS…
Hailing from the the last episode in the three-part pilot - here's Mirage's parachute! And here's Mirage with his chute; the cords used here are actually 2mm single core paracords. We've also done up a hanger piece which clips onto the…
Poop chute to go with the poop dumpster I found on here for my 3d printer. You will need slightly longer screws. I use the ones that come in the top glass panel handle. ( I replaced those with longer ones for the mod to prop the top glass…
Hi everyone, If you’ve upgraded to the Creality CFS system , you might have noticed the stock nozzle wiping routine is not using the purge chute nozzle wipe one. I’ve written a custom macro, cfs_nozzle_clear , to make the cleaning process…
I found many bin attachments online, some that curve around the machine and others that are free standing. What I wanted was a permanently mounted stand with a bin that sits securely in place, stays close to the machine to save space and…
Modification of original ( https://www.makeronline.com/en/model/Anycubic%20Kobra%20S1%20Poop%20Chute%20Slide%20With%20Bin/170136.html ). Widened the bottom section to allow more collection on larger prints. Added a lid. (My cat was…
This is an updated add-on for my K2 Plus Ventilation System, which you can find here: The new Poopchute v2 features a redesigned funnel with a larger opening to reduce the risk of clogging, along with a completely new mounting system for…
I made a small poop chute box before, but I realised that it would fill up too quickly. Hence, I created this masterpiece. It slides right into the area where a poop chute box would go (that is if you are using the poop chute found…
a poop shute for the Kobra S1 in order to have a poop collection on the side of the machine
I lost the original clearing tool for my snowblower and found the Chute Clearing Tool ver 2 by "kaje". It follows the same design concept and completes the set. The handle has a rough texture for better grip. I hope this is helpful to…
Function ：Guide waste material to slide down from the left side of the printer via the chute. Key Features 1. No original part replacement, easy installation 2. Metal-free, fully 3D-printed 3. Printable with any material 4. Only 51g, easy…
I designed this gear to replace the stripped gear for my Ariens snowblower. It needed some minor filing on the teeth of the gear to get it to mesh better with the metal drive gear but all in all is working properly. I printed with PETG 8…
Modification of Wide version ( https://www.printables.com/model/1563709-anycubic-kobra-s1-wide-poop-chute-slide-with-bin-a ). Widened the bottom section to allow more collection on larger prints. Added a lid. (My cat was stealing the poop…
I used Mark Litchfield's poop chute design and designed a holder for the small bin so that it will always sit in the same exact position after every dump. It uses the screws that are already by the side of the frame. No support needed I…
I printed the slide standing up with tree supports on build plate only. So the bottom where filament fall through will be on the build plate and the tree supports will be supporting only the parts where the screws go through. 2. The…
Poops chute deflector for BambuLab A1 Mini in 2 Parts
Description: Everything I printed on my AD5M Pro, using a 0.4mm nozzle. The riser was made with PETG, just to match the enclosure, but can easily be made with PLA. The 3mf file is set up for my AD5M Pro, with eSun PETG-HS. The chute was…
I was having a lot of trouble getting supports to adhere when trying to print @MikeyLew32's poop chute. In a bout of frustration, I realized that a single change almost completely removes the need for supports, and it still prints in one…
Waste bin features a mechanical locking mechanism that snaps directly onto the waste chuck. No magnets, no screws.
This is a poop chute container upgrade for the Anycubic Kobra S1 . The containers are airtight and available in three sizes: Small, Medium, and Large . Thanks to the sealed lid , the container can also help improve the overall enclosure…
remixed the Modell from Bearpa Engineer so the filament would fall right next to the printer instead of behind it.
Poop Chute for Qidi Plus 4 with detectable bucket. All new based on features from all my favorite designs that i am currently using. wanted on design for all my printers. Currently with 75x100, 75x150, 75x200, 100x100, 100x150 and 100x200…
Poop Chute for Qidi Max 4 with detectable bucket. 2 Versions, one that uses the current screws to help attach to the back of the machine, and one version that does not use any screws. All new based on features from all my favorite designs…
FOR ENDER 3 V3 SE, THIS MOD IS INTENDED TO BE USED ONLY WITH THE X AXIS LINEAR RAIL MOD BY ben choose the correct one for the hotend you are using requierd hardware: original M4 countersink screw M2x10 self tapping screws (4p) (filament…
Chute for purge material for a K1 with CFS. Didn't like how you couldn't easily unclog the other version out there. This one has slots to use the wire tool that came with my K1 to dislodge anything that gets stuck on the way down. It also…
Poop Chute for Anycubic Kobra S1 with detectable bucket. Based on features from all my favorite designs that i am currently using. wanted one design for all my printers to calm my OCD. Currently available with 75x100, 75x150, 75x200,…
Cat Proof Waste / Poop Chute with Tool Holder for KS1Max JUMBO Version Here So this is my version of a waste/poop chute for the new Kobra S1 Max. I needed something quick as my cats seemed to think my new machine was spitting out candy,…
Wanted a nice clean purge bin for my Q2, have added Qidi logos to make it look OEM. Printed mine in green hyper PETG, works really well with the purged filament making it's way around to the front easily. 2 walls 10% infill and it feels…
Makita miter saw dust chute for the LS0815FL model. Designed by hand-measuring the broken original part; it fits well, with no major differences compared to the OEM one. I printed it in PETG, with the wide side up at an angle so there are…
Poop chute for the q2 you will need supports for the nipples that go into the screw recess also you will need longer screws I used #4 5/8 pan screw from the hardware store
A Flashforge AD5X poop chute basket that's compatable with the left handed poop chute designed by Mark Litchfield here .
needed 8 magnets 6x3mm or less if you want printed with PLA+ 0.2 layer height
*UPDATE / FIX* The original file " Chute-Mid" was a early prototype and not the correct file, this chute will jam! The correct file is now in its place and the prototype was removed. If you already made the original, simply download the…
This hybrid upgrade for the Anycubic Kobra S1 Combo is a must-have for printing technical filaments like ABS or ASA. It extracts toxic fumes (VOCs) directly at the source while keeping the printer's purge functionality fully operational.…
This is a fix for the Bodum BISTRO coffee grinder (model 11750). Unfortunately, Bodum messed up the design of this coffee grinder, allowing for the ground coffee to fall through the grinder's internal space instead of the catcher. This…
Now your dummy 13 can jump from higt places without anything happenig to them
The best way to thank a designer is to post your build/make! Also see: The CFS Bracket is free in my other files for download! 🚀 Upgrade Highlights Purge System Upgrade (Clog-Resistant) Open chute design eliminates jams Easy front access…
Yet another poop chute for the Anycubic Kobra S1. I didn't like any of the designs I could find and most of the designs had a problem where the waste would collect at the top and require manual clearing. This is a minimalist design that…
While the original from “the left handed poop chute designed by Mark Litchfield” -klick her- needed supports, this version sits flat on the platte so you can print it without any. I’ve also aligned the fine structures to face the AD5X's…
Inspired by my struggles getting the chamber warm enough to print ABS well, I wanted to create a door to cover the poop chute hole to help keep in heat from a mini heater inside the chamber. I also wanted to easily open and close the door…
Turn your old plastic bags into a fun parachute for this paratrooper soldier! The model creates an entertaining outdoor toy for kids. , it requires supports for optimal results. For best durability, print with 45%–55% infill using PLA or…
This is a poop chute for the Flashforge Adventurer 5X aka AD5X newer version, wider and extended with custom bin that allows acces to power button, passtrough for power cable and room for Lan cable. Easy installation, large bin, no…
I've been looking to better seal the otherwise leaky Q2 for printing materials like ABS and ASA. Although the built in filter does a good job at keeping VOCs at safe levels, some filaments smell really really bad, which lead to the room I…
Newest Updates & Early Access: I publish my latest designs and optimized Bambu Lab print profiles first on my MakerWorld profile. Check it out here for the newest versions: https://makerworld.com/de/@flibi This version here on Printables…
A functional, magnetic purge waste bin for the Creality K2 Plus and CFS multi-color system. It smoothly directs purged filament away from mechanics while ensuring the rear exhaust ventilators remain completely unobstructed for optimal…
Update 14.08.2026: Added a V2 Version of the drawer, hopefully it's gonna make it easier to empty the drawer. Overview The first thing I made after receiving my CC2. This is a simple side drawer where the “handle” is just a hole. It works…
Remixed the model to accommodate 3 6x2 magnets (to be glued in place) to ‘stick’ the pooper to the X1c Removed the top and bottom layer in bottom of the bin to show the infill. Infill has been made small enough to still catch and hold all…
Bambulab upgrade - Poop chute D. 120mm x H.184mm x W.166mm Hole for magnet W.8.5mm x H.6.5mm x D.3mm .gcode file are for X1 cabon with AMS multicolor
I found an awesome magnetic chute for the P1S, but it was tiny and didn't really hold all that much waste, so I decided to create this model based off the original. This one is substantially larger (90mm x 90mm x 100mm tall) and can hold…
I printed it with 0.2 mm layers (PLA) and the large opening on the build plate. Sliced it with Prusa Slicer and chose tree support (support on build plate only). The print took about 23 hours. Feel free to improve the design:…
Printed in PETG and superglued together. .30 Draft setting with supports Prints in about 4h 15 m for both parts together.
A throu deck waste chute designed for the Tecan Fluent liquid handling workstation. After teaching, the chute can be used to dispose pipetting tips (FCA and MCA) and microtiter plates (via the RGA), dropped in portrait orientation.…
Intended to be glued to trashcan's lid after making a hole in it
This covered purge chute prevents any spillage and prevents pets from getting to the filament scraps when no one is looking. The bucket and lid can be removed to dump the scraps. The covered guide screws to the X1C with the provided screws.
Connecting a bag to the my Harbor Freight wood chipper has always been awkward. This attachment adds a chute that a bag can be tied onto easily. The top of the chute zip ties to the fastener piece. The bottom zip ties directly to the…
I needed a container to catch the purge “poops” that come out the back of my X1C so my cats don't try to eat them. Most of the models for catching poop I found have an open top, so the cats could still get into them if sufficiently…
I needed a way to redirect the poop coming from my Kobra 3 printer to a bin under the table. the chute is attached to the table using VHB or any double sided tape. --------- It works well together with this poop diverter that you attach…
Loved the idea of the original, especially the simpler “just glue a magnet inside” approach, but the model had a few areas with inconsistent sweep widths leading to some odd print layers. I remodeled this from the ground up. I still…
I found the "Poop" (purge) chutes shared online overly complicated and bulky. My printer sits on furniture with very limited depth so I designed this chute to fit in the space left between a common 90 degree PSU cable and the wall . That…
2mm thickness 330g with 0.2mm layer and tree support narrower≈290g for narrower one, I strongly recommend to use support enforcer as shown in picture I uploaded
Remixed from Bambulab P1S Poop Chute to support for 6x3mm magnets
V1.1: much smaller back panel cleaner model PRINT WITH ARACHNE (Orca Slicer: Quality → Wall generator → Arachne). Otherwise the thin support connectors may not print at all. ----------------------------------------------- This is a…
This is my second generation model and it shows vestiges of its earlier form. Originally needing supports, this version eliminates supports although the face against the post is quite rough. The knobs that engage the sign post fit our…
Water Bottle Car Cup Holder Adapter designed for Camelbak Chute 32 oz. Will fit water bottles up to 9.5 cm in diameter (ideally larger than 8.75 cm). Print with support for overhangs or slice into 2 pieces to attach with screws. Planning…
This mini-Orion space capsule is perfect for your classroom lesson on human spacecraft. A parachute can easily be tied to the ring for a competition in capsule return via parachute drop. Update: Added V2, which is scaled to 85% the…
Poop basket for the Bambu P1S model. The colors can be chosen as desired. Internally on the back there is also a small space for a powerful magnet with a maximum diameter of 10mm. Halloween is the theme of the design. The printing…
This is a replacement coin chute for a Peradon Timesafe DCT Light Meter S5860. It has been tested and works. I printed it in PLA as it doesn't need to be particularly strong or hardwearing. These are apparently impossible to buy without…
Very soon after starting to use the Dronavia Kronos MVC3 kit, the button on the parachute broke so I designed this part as a replacement. I tested it with Fiberlogy Fiberflex 40D without support and it worked great.
I found this poop chute from V3 Precision a while ago and really liked it, but didn't print it, because it wasn't exactly what I was looking for. I couldn't find something that I liked more, so I decided to adjust this one in order to…
Same great magnetic poop chute bin from Steven La. The only difference is that this one will use 4 6mm x 3mm round magnets. Not quite the magnet size you need? You can use this Tinkercad file to modify the holes to what you need.…
A doserless conversion for the Rancilio Rocky. This remix uses an open chute so you can clear out the retained grinds. The Rocky retains ~1g of coffee and this lets you clean it out easily. You'll also need to print the retention clip…
A doserless conversion for the Rancilio Rocky. This remix uses an open chute so you can clear out the retained grinds. The Rocky retains ~1g of coffee and this lets you clean it out easily. You'll also need to print the retention clip…
Poop chute for Bambu P1 / X1 Poop chute with lid for Bambu Printers. https://buymeacoffee.com/jptr84https://buymeacoffee.com/jptr84
A simple chute to collect those delicious filament poops from the K2 Plus. This is practical if you have access to the back of your printer and don't want poop all over the floor. It's made to be easily removed and emptied without any…
I didn't like the massive options I've seen. ~20g filament & 45 minutes printing. Other designs use upto 400g of filament and take several hours to print. I want the side on my printer clear. The box can be almost anything you choose…
Intro I designed a replacement coin chute for my friend's Ms. Pac-Man cocktail able, since this part can be hard to find and only seems to be available in used condition or NOS. Comparable products can be found here: Action Pinball - U812…
The purge ramp helps guide the poop down through the cutout in the plate, where you can easily gather it from the bottom of the printer. But the main advantage is the spot for mounting the nozzle wiper. The silicon nozzle wiper can be had…
Poop chute for the Bambu Lap P1P/ P1S, the poop chute is attached to the back of the printer using 4x 12mm x 3mm magnets. Material required: 4x magnet round 12mm x 3mm Print setting: overhead with tree support
I am using my grandpa's old DW733 planer which is lacking a dust collection chute, so dust just spews all over my garage. I made an attempt to design my own dust chute since there are screws for one on the back of the machine. I couldn't…
Didn't see anyone with a poop chute that went around the Qidi Plus 4 yet. So I decided to slap one together. By no means is this one the best design, but maybe it's a good start for someone to remix? It's not perfect and there are…
I made a simple shroud for the pellet chute on my LSG Lone Star Grillz Pellet grill to protect it from moisture Recommended PETG or higher temp resistant materials. The holes for the magnets are sized at 15mm x 4mm (two 2mm thick magnets…
Box for your showering stuff - I modified the model in PrusaSlicer so that it fits my needs an so that the bottom of the box is just plain infill. So the water can drip through. Modify the box with the 3MF in PrusaSlicer as you need it.…
