Creality K1 Max Purge Chute Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I Upgraded to CFS on two of my K1 Max's and wanted to purge out the rear of the machine.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 1211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a rear Purge shoot and rear deflector for the K1 Max. This shoot needs modifying of the rear panel in order to use it. I used a 30MM Hole saw to drill the hole where the filament spool goes on the original Panel, Once I drilled the hole I Used a template to cut a square opening to accept the shoot. I used a Dewalt Vibrating cutter to open the hole.
I printed the parts with PETG and used Creality print for slicing.
The double sided tape is a must to secure the purge shoot from moving and getting in the way of the Z Movement. please clean the area with Alcohol prior to placing the tape.
I used two small screws to hold the Template in place prior to cutting.
I cleaned the square with a file before inserting the shoot on the back wall. I have not used the plate that covers the stepper motor nor have i used the panel that blocks the Z screw from getting Filament on it. the shoot will fit if you prefer to use the CFS parts. I have run the printer multiple times and have not had any problems with the shoot. The rear Deflector shoot is just pushed on the back of the inner shoot sticking out of the back panel. The purge collection tray is just sitting on the base surface and is not attached When I update the tray I will add the files. if you have any questions please do not hesitate to ask.
I have added a new model that allows you to reverse fix the Square that was cut out of the back of the machine incase you want to use the external Spool or want to use the New CFS-C unit.
https://a.co/d/gawwY6e