Bambu Lab X1/P1 Magnetic Diaper (Enclosed Poop Chute)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Container for catching purge waste that attaches to the back of Bambu lab printers. Attaches with scraper magnets.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 470
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I needed a container to catch the purge “poops” that come out the back of my X1C so my cats don't try to eat them. Most of the models for catching poop I found have an open top, so the cats could still get into them if sufficiently motivated.
I liked the mechanical indexing of this model, the enclosed form factor of this model, and the reuse of spare scraper magnets from this model, so I decided to combine those features into one. You only need 1 magnet on the top, but you can use both if you want it to snap on tighter.
The model is somewhat optimized for printing, so you shouldn't need any supports when printing. I printed mine in transparent PCTG so it's easy to check how full it is. Excuse the poor print quality; still getting everything dialed in.
FreeCAD source model is included, though due to program limitations the feature tree is a little messy. I may come back later to clean it up.
